Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Webby the Bear]

Hey dudes,

I got an MOT coming up and I'd like to give the old girl a full service. I have mentioned changing the PAS fluid before and I think it was RobG kindly helped. However I found this vid.... this is exactly wht I'm going to do except I believe I should have the front on axel stands when turning ze wheel. would you mind just confirming that what i'm thinking is correct

http://www.youtube.com/watch?v=Xstszfz1Dp8

oh and is it dexron III?

Cheers

[TheBoy]

dex II

[Webby the Bear]

cheers mate 

[RobG]

Hey dudes,

I got an MOT coming up and I'd like to give the old girl a full service. I have mentioned changing the PAS fluid before and I think it was RobG kindly helped. However I found this vid.... this is exactly wht I'm going to do except I believe I should have the front on axel stands when turning ze wheel. would you mind just confirming that what i'm thinking is correct

http://www.youtube.com/watch?v=Xstszfz1Dp8

oh and is it dexron III?


Cheers

Easier to turn, and saves "tyre scrub"

[Webby the Bear]

Hey dudes,

I got an MOT coming up and I'd like to give the old girl a full service. I have mentioned changing the PAS fluid before and I think it was RobG kindly helped. However I found this vid.... this is exactly wht I'm going to do except I believe I should have the front on axel stands when turning ze wheel. would you mind just confirming that what i'm thinking is correct

http://www.youtube.com/watch?v=Xstszfz1Dp8

oh and is it dexron III?


Cheers

Easier to turn, and saves "tyre scrub"

Cheers broseph brostoffisson

[omega3000]

Hey dudes,

I got an MOT coming up and I'd like to give the old girl a full service. I have mentioned changing the PAS fluid before and I think it was RobG kindly helped. However I found this vid.... this is exactly wht I'm going to do except I believe I should have the front on axel stands when turning ze wheel. would you mind just confirming that what i'm thinking is correct

http://www.youtube.com/watch?v=Xstszfz1Dp8

oh and is it dexron III?

Cheers

He made that look easy  dont know if i would trust swmbo turning the wheel while holding the drain pot though  how much fluid drains out when the pumps running ?

[Webby the Bear]

thats a good point. any ideas on how much fluid im going to need?

[RobG]

thats a good point. any ideas on how much fluid im going to need?

1.3Ltr`s max. If you don`t want to jack the front up and keep turning the steering wheel.
1) Empty the PAS header tank
2) Remove the uppermost  pipe (return) and place the end into a container
3) Fill the reservoir with fresh fluid
4) Run the engine
5) Keep topping up the with fresh fluid until the old fluid is replaced (check the colour)

[Webby the Bear]

Cheers rob but i got no problem with jacking/standing the front of the car 

can i just clarify that this is the return pipe (my pic below) and the process would be:

1.) empty PAS resevoir
2.) remove pipe (pictured) and empty as much in to bowl as poss.
3.) jack up, put on axel stands
4.) start car
5.) turn wheel full right to full left a couple of times to get as much out as poss.
6.) refit pipe
7.) put new fluid in and continue to turn wheel left to right until at the right level

cheers mate 

[RobG]

That`s the pipe Steve. As said, due to steering being a recirculating system you can just let engine idle without jacking

[Webby the Bear]

That`s the pipe Steve. As said, due to steering being a recirculating system you can just let engine idle without jacking

cheers rob, so the process i'm going to follow is correct?

cheers budski
 

[tigers_gonads]

How often are you supposed to change the pas fluid ?

I'd be suprised if my shed has ever had it changed 

[RobG]

That`s the pipe Steve. As said, due to steering being a recirculating system you can just let engine idle without jacking

cheers rob, so the process i'm going to follow is correct?

cheers budski
 

Your way or this way

1.3Ltr`s max. If you don`t want to jack the front up and keep turning the steering wheel.
1) Empty the PAS header tank
2) Remove the uppermost  pipe (return) and place the end into a container
3) Fill the reservoir with fresh fluid
4) Run the engine
5) Keep topping up the with fresh fluid until the old fluid is replaced (check the colour)

Your choice Steve

[Webby the Bear]

Dudes is this shizzel ok?

http://uk.ebid.net/for-sale/atf-q-gm-dexron-ii-ltr-8940198.htm?from=googleshop_uk

[amba]

As long as its to DEX II spec then it will be fine.

Most Motor Factors sell although some have reported that Carlube Oils are poorer quality than GM or similar...but its power steering and any brand will be ok...better new fluid than old as steering will feel smoother.