Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Radar]

When undoing the crank sensor torx bolt next to oil filter housing i noticed that there is a flat sided oval rubber seal that was deteriorating - i think this is the front of the autobox (there is another rubber round seal further down if that helps) - anyway i very gently touched it and it literally disintegrated - the part number on it is now not visible.

Does anyone know what this rubber seal is / part number is and is it that important? i.e. could i drive it still - no signs of leaking from the area for now.

[Radar]

Looks like part number 90419418 - but cant find a match on internet?

[Radar]

Sorry p/n is 90412453

[05omegav6]

Tried to have a look on Opeloem, but appears to have been shut down

[Radar]

Thanks for trying  - just checked with the stealers and the technical term for it is a cap! - Just off to pick it up - it looks like its there to prvent dust coming in as there is no fluid on the inside

[amba]

Its the cover bung that allows access to the bolts that hold the torque converter to the flexi-plate.

Alot of Omegas either don,t have them fitted or they have fallen apart as mine did when had a recent gearbox replacement.It stops muck etc getting into an otherwise void space but really should be covered over.

Another circular bung under the bottom of the gearbox body to.

[05omegav6]

 

Was about to suggest some speed tape

[Radar]

cheers guys - new one fitted - set me back £1.68