Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

I reckon item 22?

[Shackeng]

However, thanks to the reminder by Tunnie and other recent posts, I will order an HBV to carry in the boot along with my crank sensor for the 3.2. I guess I better get one for the TD as well.

[Shackeng]

I reckon item 22?

Thanks Jaime. Are the 'o' rings on there as well? I note it only shows one #22.

[TheBoy]

EPC says 2 x 22 are required.

O rings are different I believe, and I suspect on the condensor screen - cant check at mo...

[RobG]

Thanks Byron.

Neither I nor my dealer can identify the AC compressor Dowty seals, and condenser 'o' rings. If someone could point them out on the pic, I would be grateful. Although from what Tunnie says, this is probably the wrong diagram.

90381758
Size  9.3 x 2.4

[RobG]

EPC says 2 x 22 are required.

O rings are different I believe, and I suspect on the condensor screen - cant check at mo...

These aren`t they

Only part # I can find is 15-2722 (American site) but GM should be able to cross ref.

Manufacturer: ACDELCO GM ORIGINAL EQUIPMENT
Part Number: 15-2722
Description: A/C Gasket
28mm Od X 15.5mm Id ; INCLS TWO 5/8 SEALS ; 2 Per Veh

[Shackeng]

Thanks very much Rob. 

[RobG]

Thanks very much Rob. 

Suppose I`ll have to think about using "shopkeeper" as my username