Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[amba]

The end is in sight now  and I just need a couple of bits to complete the "jigsaw"

Pair of decent/strong bonnet support rams for F/L
Ignition barrel rubber 0/1/2 position rubber cover plate
Front glove box courtesy light

Thanks guys and pm with details

[albitz]

Got bonnet struts. Can check on other bits.

[omegod]

Got the other bits but no struts

[zirk]

got 1 and 2 might have the 3rd if fitted to a iPlod.

[05omegav6]

got 1 and 2 might have the 3rd if fitted to a iPlod.

Should be

[amba]

Thanks guys 

As Zirk is kindly doing a bit of electrickery for me would make postage easier from just 1 source so if all 3 bits are available off the "plod" then please take as sorted now

[zirk]

OK, just to confirm the rubber bit your after is the large rubber washer that fills the gap betwwen the  Ing. Barrel and the two plastic outer housings.

Will get the bits off Monday as Car is up the road to me.   

[zirk]

got 1 and 2 might have the 3rd if fitted to a iPlod.

Should be

Guessing it should be there as well Al, but you never know with Plods, guessing they would need to shed some light on how many Mars Bars and Ciggy Packs are left in the Glove Box though. 

[amba]

Cheers Zirk...yes the rubber washer type thing that fits over ignition barrel and fills the void between that and the column trim..seem to remember it had 0/1/2 stamp printed on it.

Cant see why "plod" wouldnt have glove box light as you are right about mars bars etc.

Drop me a pm /text etc when removed with price  inc postage  also for the other electricky bit too 

[zirk]

Ok Andy, all three bits now in my hands, will call later.