Senator A Build

Started by andyc, 09 January 2014, 22:14:14

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

andyc

Ok been meaning to do this for a while as i've been adding bits into the "What have you done to your car" post so lets start

Car in question is a LHD, series one Senator A in green and by green i mean green. Green paint, Green Carpets, Green Seats, Green Dash etc etc. The car came over from Germany via a contact in Holland which we then collected from Harwich, oh what fun to drive a car that size onto a trailer thats still hitched to the van and has a slipping gear box, had to rev the nuts of it go to it to more then jam the brakes on to stop it from hitting the back of the van.

Although the box was slipping the car did run well as we used it the year before in a fact finding trip to Opel Classic Parts in Germany, over taking plod on the autobahn was an eye opener.

So the Car




Oh and its sister arrived the following year

but more on that later.

First job was to start stripping the engine bay out as this was where most of the metal work was going to be done


So of the problems
Inner wing


Head Lamp Panel


Inner wing / Chassis leg Lip


Right side A Pillar Flitch Panel


So first jod to get stuck into was the replacement of the inner wing although it took a few months to find an inner wing but after having a Rekord one arrive which is a four pot we finally got the correct one




Inner wing fitted with the battery try


Next job is to tackle those headlamp panels

Cheers
Andy
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

jonny2112


Andy B



henryd

other rides 
  mk3 Volvo v70 2.0 Diesel , Pug 306 cabriolet, Pug 308 gt 180
  Sterling elite trekker pikey wagon

tunnie


BazaJT

I used to have one of those,mine was RHD in Helios blue and was a late one with some bits of the later series two cars-dash,seats etc.,but still with the chrome bumpers and original body style.Come to think of it I still have three rear light units that would fit it although they're actually off a Royale[dull red centre strip not the chrome-stainless steel?-ones on the Senator.

omega3000

Nice one , they were a bit over the top with the green . Nice classic shape  :y

Webby the Bear

RIP Paul Lovejoy

tigers_gonads

Grandad had a Monza 3ltr in that colour
Drop dead gorgeous  :-* :-*

Field Marshal Dr. Opti

Quote from: tigers_gonads on 10 January 2014, 20:22:40
Grandad had a Monza 3ltr in that colour
Drop dead gorgeous  :-* :-*

I always loved the Monza. :y

Keith ABS

  Still have my series 1 1/2 as they were known with the later dash etc and chrome bumpers. Bit of a sorry state at the moment though. Had a series 2 in green, and yes everything is very green. Needed sunglasses to take the edge off it while driving ;D. Bet that inner wing cost a pretty penny though Andy?
Keith B

belldarr

I had a 1984 Opel Senator in that exact color and yes it had the same green velvet interior, I had a big accident in it where the car rolled onto the roof then back onto the wheels again, the roof was remarkably still in shape afterwards and I could even drive it!

Great to see one being saved  :y

Darren

2woody

Andy,.....

I don't suppose that you'd be able to use a Monza GSE on a C-plate for spares maybe ?

its pretty ropey but complete - and its local to you ( Spalding )

and its free, provided I can have the gearbox back.

hoofing it

Going to look good when its done have fun :y
My senny A (in red) was like your one about 17 years ago then its previous owner spent about £5500  doing exactly the same as you then wax oiled every crevice and its never out in the rain.