Topic: removing badges (Read 967 times)

flyer 0712 · « **on:** 04 July 2014, 12:52:15 »

How can I remove the glue/outline from my omega where the badges are fitted as it leaves a imprint once they are removed thanks

pauls · « **Reply #1 on:** 04 July 2014, 12:58:08 »

I used tcut and a lot of elbow grease

05omegav6 · « **Reply #2 on:** 04 July 2014, 13:07:53 »

White spirit or petrol helps, but be sure to polish and wax thoroughly afterwards

omega3000 · « **Reply #3 on:** 04 July 2014, 13:41:53 »

Industrial strength glue remover , thats what i used . one wiff of the stuff knocks you off your feet

Other than that white spirit

Nick W · « **Reply #4 on:** 04 July 2014, 13:49:34 »

Acetone.
But use it sparingly, and wipe off immediately as it can soften the paint.

flyer 0712 · « **Reply #5 on:** 04 July 2014, 17:29:19 »

ok folks thanks for that i will give it a go

biggriffin · « **Reply #6 on:** 04 July 2014, 19:37:03 »

Gently heat with hair dryer, then peel badge off, then remove residue with,petrol or meths then polish

Mr.OmegaMan · « **Reply #7 on:** 04 July 2014, 19:50:37 »

Considering doing this myself, Remove the "Vauxhall" and "Omega 3.2 V6" badges off the boot lid, Would make it eaisier to clean some what