Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: seats  (Read 2380 times)

0 Members and 1 Guest are viewing this topic.

flyer 0712

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 2713
    • View Profile
seats
« on: 03 August 2014, 10:03:02 »
Can the seats from a 3.2 v6 be fitted into a 2.2.....I know they will fit but because the fronts have all the extra wiring for seat position can they be fitted and just basic wired as in the 2.2...ta much.
Logged

powerslinky

  • Guest
Re: seats
« Reply #1 on: 03 August 2014, 10:15:35 »
Quote from: flyer 0712 on 03 August 2014, 10:03:02
Can the seats from a 3.2 v6 be fitted into a 2.2.....I know they will fit but because the fronts have all the extra wiring for seat position can they be fitted and just basic wired as in the 2.2...ta much.

I have done a couple of seat changes & FL to FL  will be ok.  If elite seats a small wiring mod is required to allow memory seat function to work .

Don't turn ignition on while seats are disconnected electrically, as this will put the airbag light on  ;)

There is a "how To" in the maintenance guide under ICE/electrical  : retro fitting 



edit:  Apart from the small wiring mod if you using elite seats  . . .it's just plug & play  . . all the the connectors are there

    HTH  :y

« Last Edit: 03 August 2014, 10:27:30 by Essex Big Al »
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: seats
« Reply #2 on: 03 August 2014, 10:26:33 »
If the 3.2 is an Elite as opposed to an MV6, the passenger seat will have the child seat transponder. Do not connect the yellow flat rectangular plug under it.
Once fitted the SRS dash warning light may illuminate and will need a TechII or similar to reset
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

powerslinky

  • Guest
Re: seats
« Reply #3 on: 03 August 2014, 10:32:49 »
Quote from: RobG on 03 August 2014, 10:26:33
If the 3.2 is an Elite as opposed to an MV6, the passenger seat will have the child seat transponder. Do not connect the yellow flat rectangular plug under it.
Once fitted the SRS dash warning light may illuminate and will need a TechII or similar to reset

Good point Rob  . .  . that child seat sensor connector , could do with. being added to the guide as it is not there

As I well know when I connected it on one of my seat changes  ::) ::)       
Logged

flyer 0712

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Posts: 2713
    • View Profile
Re: seats
« Reply #4 on: 13 August 2014, 00:05:11 »
Thank you guys for that info  :y :)
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: seats
« Reply #5 on: 13 August 2014, 22:01:26 »
Quote from: RobG on 03 August 2014, 10:26:33
If the 3.2 is an Elite as opposed to an MV6, the passenger seat will have the child seat transponder. Do not connect the yellow flat rectangular plug under it.
Once fitted the SRS dash warning light may illuminate and will need a TechII or similar to reset
That should read a new ecu is required ;)
Logged
Grumpy old man

powerslinky

  • Guest
Re: seats
« Reply #6 on: 14 August 2014, 21:32:41 »
Quote from: TheBoy on 13 August 2014, 22:01:26
Quote from: RobG on 03 August 2014, 10:26:33
If the 3.2 is an Elite as opposed to an MV6, the passenger seat will have the child seat transponder. Do not connect the yellow flat rectangular plug under it.
Once fitted the SRS dash warning light may illuminate and will need a TechII or similar to reset
That should read a new ecu is required ;)

Hi TB . .  can you explain more on this as I am thinking of switching my FL  MV6 seats for FL elite leather . Will all be OK if the yellow connector is left alone as it is at the moment ? :-\
Logged

05omegav6

  • Guest
Re: seats
« Reply #7 on: 14 August 2014, 21:41:40 »
Would think that leaving the flat yellow plug unconnected regardless should be enough to prevent it becoming an issue :-\
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.02 seconds with 17 queries.