Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: Running rough after clearing code?  (Read 2665 times)

0 Members and 1 Guest are viewing this topic.

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Running rough after clearing code?
« on: 23 September 2014, 09:01:56 »

On the drive home last night the EML came on, no rough running drove fine.
As soon as I got home I plugged my code scanner in and it came up with the usual P0420 code.
Cleared that, started it up and it ran fine, turned it off.
Came out this morning (a lot cooler this am) started the car and it died instantly?
Started it again and it ran like crap.......tried to rev it up and nothing on the throttle, eventually it did pick up and I could rev it up but its almost in slow motion on the pedal!
If I press the pedal the rev do rise but very slowly.
Managed to drive it to work hoping it would clear itself but the same really.
The car feels very under powered under 3000rpm then it will pick up.
The car still has no EML light on and is showing no codes with the scanner.
Any advice guys?  :y
Logged
Omega MV6 3.2 Estate

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #1 on: 23 September 2014, 09:02:26 »

Sorry its a 2001 MV6 3.2 V6
Logged
Omega MV6 3.2 Estate

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #2 on: 23 September 2014, 09:25:30 »

Strangely just gone back out to the car and its started fine and will rev up ok?
Could this be CTS related and now its up to temp its working again?
Can the CTS be unplugged to see if this happens again?
Logged
Omega MV6 3.2 Estate

05omegav6

  • Guest
Re: Running rough after clearing code?
« Reply #3 on: 23 September 2014, 09:40:02 »

Carry out the pedal trick and report back with the codes :y
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Running rough after clearing code?
« Reply #4 on: 23 September 2014, 10:01:09 »

It should log a code if behaving like that :y
Logged

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #5 on: 23 September 2014, 10:12:19 »

How do you do the pedal trick?
I've scanned it with my code scanner and ...nothing?
Logged
Omega MV6 3.2 Estate

Vicar

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • staffs border
  • Posts: 109
    • 2.0 CD
    • View Profile
Re: Running rough after clearing code?
« Reply #6 on: 23 September 2014, 10:14:45 »

I had this with one many moons ago, isn't it the throttle position sensor? All I did was turn it off and it cleared off. It came back from time to time. Yours may not happen again for weeks or months.
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: Running rough after clearing code?
« Reply #7 on: 23 September 2014, 10:18:32 »

How do you do the pedal trick?
.....

Accelerater & brake pedal to the floor, turn ign on and count the flashes on the EML. It's explained in a guide somewhere. :y
Logged

PhilRich

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • A bit further North of the Back of Beyond!
  • Posts: 10338
    • Mk 2 Volvo V70
    • View Profile
Re: Running rough after clearing code?
« Reply #8 on: 23 September 2014, 10:37:45 »

How do you do the pedal trick?
.....

Accelerater & brake pedal to the floor, turn ign on and count the flashes on the EML. It's explained in a guide somewhere. :y
[/highlight]




http://www.omegaowners.com/forum/index.php?topic=90581.0

Saves you looking ;) ;D

Logged
If it ain't broke keep fixing it 'til it is!

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #9 on: 23 September 2014, 11:11:26 »

How do you do the pedal trick?
.....

Accelerater & brake pedal to the floor, turn ign on and count the flashes on the EML. It's explained in a guide somewhere. :y
[/highlight]

Cheers for that  :y


http://www.omegaowners.com/forum/index.php?topic=90581.0

Saves you looking ;) ;D
Logged
Omega MV6 3.2 Estate

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #10 on: 23 September 2014, 11:13:18 »

Just done it and it came back with
10 1 10 10
So I would presume P0100
Which is:
P0100 Mass or volume air flow circuit high input
P0100 Mass or volume air flow circuit low input
P0100 Mass or volume air flow circuit range/performanceProblem

Is this the MAF thats playing up?
Logged
Omega MV6 3.2 Estate

05omegav6

  • Guest
Re: Running rough after clearing code?
« Reply #11 on: 23 September 2014, 11:45:02 »

Unplug the Maf. If it improves unplugged then you need a new one :y
Logged

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #12 on: 23 September 2014, 12:10:23 »

Unplug the Maf. If it improves unplugged then you need a new one :y

Cheers for the info guys :y
Logged
Omega MV6 3.2 Estate

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: Running rough after clearing code?
« Reply #13 on: 23 September 2014, 12:59:02 »

How do you do the pedal trick?
.....

Accelerater & brake pedal to the floor, turn ign on and count the flashes on the EML. It's explained in a guide somewhere. :y




http://www.omegaowners.com/forum/index.php?topic=90581.0

Saves you looking ;) ;D

I was on my phone  ;) ;)
Logged

carswaps

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • West Yorkshire
  • Posts: 102
    • Omega MV6 3.2 Estate
    • View Profile
Re: Running rough after clearing code?
« Reply #14 on: 23 September 2014, 18:43:01 »

Thanks guys It was the maf!
Just ordered a new Bosch one  :y
Logged
Omega MV6 3.2 Estate
Pages: [1] 2  All   Go Up
 

Page created in 0.01 seconds with 17 queries.