Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Diamond Black Geezer]

So about to drill some holes in the floorpan, just to add a little corrosion protection I'd like to pop a dab of paint in the hole and on the bolt going through.

-If I bought a tin of Waxoyl it should come in elsewhere on other sections of the chassis with surface rust - or should I be using the proper 'stone chip' paint, for these jobs instead?

-Seam sealer, well, never done any welding in my life (I've seen my soldering, so welding will end much worse!) so I know nothing about it, other than it 'seals the seam', hence the name 

-Blob of black Hammerite

-Something else, like black drains / gutters sealer from Wilkos (sounds silly, but I don't see why this wouldnt work, unless its actually slightly hydroscopic, or something)

Cheers in advance! 

[05omegav6]

Seam sealer followed by a lick of paint...

Well, that's what's I am planning on using for my back box heatshield anyways

[Marks DTM Calib]

A polyurethane sealer plus some paint would be my suggestion.

[kevinp58]

Scotch 3m seam sealer is the best then some body shutz.