Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Few things I need to do I'm afraid. This will affect the router, one of the network switches and the hypervisor, so I suspect we could be down for 3+ hours.

[zirk]

3+ Hours and 1 Min it is then, I gave you 1 min for Boot Up time. 

Just make the Kettle is boiled for your Cuppa, before you take out the UPS again. 

[EMD]

Quite expensive those networ switches   

[The Sheriff]

I have to go out tomorrow between 10am and, say 2pm. Get it done during that time, there's a good chap.

[The Sheriff]

Quite expensive those networ switches   

Networ switches? Sound complicated

[4x4]

If you can do it between 10 and 1 thats great as i shall be over at emds Fixingdoing some stuff to his truck lol

[TheBoy]

3+ Hours and 1 Min it is then, I gave you 1 min for Boot Up time. 

Just make the Kettle is boiled for your Cuppa, before you take out the UPS again. 

Hypervisor boot time is about 40 mins

[TheBoy]

Router has a software fault that's buggering up my phones here, and vendor states the later versions will fix.  I tried the previous version some time back and it fixed the phone fault, but knackered everything else up

Network switch has an ongoing issue with ports randomly going to sleep, needing a switch restart to cure - disabling and reenabling the port does not resolve it. Vendor is useless, and every time I report it gets a "put latest firmware on it"

Hypervisor needs an upgrade, to support new VMs

Hardware needs a bloody good clean and hoover, and a SAS cable replaced (that I needed to do months ago  )

[The Sheriff]

Router has a software fault that's buggering up my phones here, and vendor states the later versions will fix.  I tried the previous version some time back and it fixed the phone fault, but knackered everything else up

Network switch has an ongoing issue with ports randomly going to sleep, needing a switch restart to cure - disabling and reenabling the port does not resolve it. Vendor is useless, and every time I report it gets a "put latest firmware on it"

Hypervisor needs an upgrade, to support new VMs

Hardware needs a bloody good clean and hoover, and a SAS cable replaced (that I needed to do months ago  )

Get a grip, lad, bloody thing is falling to bits while you're wrinkling in the bath drinking tea.

[biggriffin]

Bloody hamster's  ,

[TheBoy]

Router has a software fault that's buggering up my phones here, and vendor states the later versions will fix.  I tried the previous version some time back and it fixed the phone fault, but knackered everything else up

Network switch has an ongoing issue with ports randomly going to sleep, needing a switch restart to cure - disabling and reenabling the port does not resolve it. Vendor is useless, and every time I report it gets a "put latest firmware on it"

Hypervisor needs an upgrade, to support new VMs

Hardware needs a bloody good clean and hoover, and a SAS cable replaced (that I needed to do months ago  )

Get a grip, lad, bloody thing is falling to bits while you're wrinkling in the bath drinking tea.

For once in my lazy life, I'm not in the bath .  Had to be a quick shower tonight, as I need to be down the pub by 6

[05omegav6]

Bloody hamster's  ,

Indeed... They'll eat anything...

...except dust it would seem

[VXL V6]

Router has a software fault that's buggering up my phones here, and vendor states the later versions will fix.  I tried the previous version some time back and it fixed the phone fault, but knackered everything else up

Network switch has an ongoing issue with ports randomly going to sleep, needing a switch restart to cure - disabling and reenabling the port does not resolve it. Vendor is useless, and every time I report it gets a "put latest firmware on it"

Hypervisor needs an upgrade, to support new VMs

Hardware needs a bloody good clean and hoover, and a SAS cable replaced (that I needed to do months ago  )

Don't forget to put on your best American accent before you upgrade the firmware on your 'ROWtur'.

[flyer 0712]

    .....

[TheBoy]

Router has a software fault that's buggering up my phones here, and vendor states the later versions will fix.  I tried the previous version some time back and it fixed the phone fault, but knackered everything else up

Network switch has an ongoing issue with ports randomly going to sleep, needing a switch restart to cure - disabling and reenabling the port does not resolve it. Vendor is useless, and every time I report it gets a "put latest firmware on it"

Hypervisor needs an upgrade, to support new VMs

Hardware needs a bloody good clean and hoover, and a SAS cable replaced (that I needed to do months ago  )

Don't forget to put on your best American accent before you upgrade the firmware on your 'ROWtur'.

You of all people should know when you call Cisco during the day, you end up in The Netherlands. Rowtur I could understand, but Christ knows what they're smoking in Dutchland