Topic: V6 small breather hole blocked. How best to clear? (Read 1814 times)

terry paget · « **on:** 13 May 2015, 21:32:12 »

As above. Failed to push wire through it. Maintenance guide states use 1.5mm drill; sounds good advice, not sure how to hold it. Pin vice?

amba · « **Reply #1 on:** 13 May 2015, 22:10:09 »

Use the copper earth wire from a bit of 2.5mmT/E cable...cut it to about 200mm in length and simple flexy bit of rigid "pokey tool"

Nick W · « **Reply #2 on:** 13 May 2015, 22:20:35 »

Use the copper earth wire from a bit of 2.5mmT/E cable...cut it to about 200mm in length and simple flexy bit of rigid "pokey tool"

Don't forget to attach a Vauxhall badge to the non pokey end before you use it or TEOTWAKI will occur!

amba · « **Reply #3 on:** 13 May 2015, 22:30:23 »

And a swarms of locusts will blacken the skies and we will all become swallowed into the bowels of the earths core .

the alarming man · « **Reply #4 on:** 13 May 2015, 22:46:04 »

And a swarms of locusts will blacken the skies and we will all become swallowed into the bowels of the earths core .

that the haldron colliders job is it not TEOTWAWKI

chrisgixer · « **Reply #5 on:** 13 May 2015, 22:49:40 »

Paper clip. ...av it!