Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[berserkerboy]

Hi folks

Just wondering if anyone has the above that they would be willing to lend/hire me? Willing to arrange postage/courier and give deposit. Unless someone lives nearby in SA19 who would be willing to help!?

Don't know for sure when mine was last done. Just been quoted £397.20 inc for cambelt and tensioner by the stealers.

Have the DVD showing how to.

[berserkerboy]

Is this kit any good?
http://www.amazon.co.uk/Sealey-VSE130-Petrol-Setting-Locking/dp/B000RO13NW

I could put it on ebay after use.

[Nick W]

That will do, but you will have to improvise the short 30mm spanner for the adjusters. Sealey do a kit that comes with one that might be worth tracking down if you're buying new. VSE 133 I think.

[Andy A]

Is this kit any good?
http://www.amazon.co.uk/Sealey-VSE130-Petrol-Setting-Locking/dp/B000RO13NW

I could put it on ebay after use.

Your better off buying this one if you can afford it http://www.demon-tweeks.co.uk/tools-workshop/locking-setting-tools/sealey-petrol-engine-setting-locking-kit-saab-vauxhall-opel-2-5-2-6-3-0-3-2-v6-belt-drive-vse130

Or if you prefer EBay http://www.ebay.co.uk/itm/Sealey-Saab-Vauxhall-Petrol-Car-Engine-Setting-Locking-Kit-Belt-Drive-VSE130-/311317097755?pt=LH_DefaultDomain_3&hash=item487bf1ed1b

It comes with the spanner for adjustment and the torque socket need in the kit. 

[chrisgixer]

Need a torx for the crank pulley and a slightly modified Allan key to do up the tensioner. Btw.

[alank46]

I have a Sykes-Pickavant VS130 kit for sale, it includes the same items as the kits above but without any spanner.  Only used twice, £40 delivered.  Can provide a photo to your email address is required.
Alan

[Andy A]

Need a torx for the crank pulley and a slightly modified Allan key to do up the tensioner. Btw.

What size torx is it Chris and What size and what needs to be modified with the allen key?

Thanks

 

[chrisgixer]

Need a torx for the crank pulley and a slightly modified Allan key to do up the tensioner. Btw.

What size torx is it Chris and What size and what needs to be modified with the allen key?

Thanks

 

Crank pulley bolt size.

Allen key is 5mm for the tensioner, but it needs a grind off the back of the elbow on it, so the socket on the torque wrench needed to tighten the tensions nut correctly, fits on properly. Otherwise, the Allen key fouls slightly.

[Andy A]

Need a torx for the crank pulley and a slightly modified Allan key to do up the tensioner. Btw.

What size torx is it Chris and What size and what needs to be modified with the allen key?

Thanks

 

Crank pulley bolt size.

Allen key is 5mm for the tensioner, but it needs a grind off the back of the elbow on it, so the socket on the torque wrench needed to tighten the tensions nut correctly, fits on properly. Otherwise, the Allen key fouls slightly.

cheers Chris. 

[2nddaniel]

I have a Sykes-Pickavant VS130 kit for sale, it includes the same items as the kits above but without any spanner.  Only used twice, £40 delivered.  Can provide a photo to your email address is required.
Alan

Is this still for sale pal?