Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sax-p]

Hello, haven't been on here for ages 

As per title can someone help me out, only thing I can see that's gone wrong is the near side rear abs ring is damaged. If I change the shaft will this fix my problem???



Thanks in advance
Trev

[terry paget]

Almost certainly. I had the same fault some years ago, reluctor ring was split and it was able to move out of alignment with the sensor. Apart for the speedo failing, you should have ABS and TC lights showing on the dash.

[sax-p]

Ya abs light is on, should I just replace the whole shaft or can this be changed???

[terry paget]

Easier to but a second half drive shaft and fit that.

[Marks DTM Calib]

The damage looks very minimal to me, any sign of sensor damage or is the ring physically split and/or teeth missing?

[sax-p]

Changing the shaft didn't fix the problem 

Checked the resistance on the sensors and they seem okay 1.5 ohms.

Could it be the abs ecu???

[sax-p]

Right update, changed the abs ecu but light is still on. Do I have to get it programmed or will it be fine, it is second hand and it came from a 2.2dti as well.

Any light on the situation would be greatly appreciated as the van is going for the yearly test and need the light and speedo working 

Thanks
Trevor

[terry paget]

Right update, changed the abs ecu but light is still on. Do I have to get it programmed or will it be fine, it is second hand and it came from a 2.2dti as well.

Any light on the situation would be greatly appreciated as the van is going for the yearly test and need the light and speedo working  >quote: Check the gearboxes on donor and your car were the same (manual or auto).

[sax-p]

Yeah it was manual same as mine.

Plugged it into a computer today but couldn't communicate with the ecu, this mean I need another ecu???

Thanks