Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Fwd drive shaft play ?  (Read 2615 times)

0 Members and 1 Guest are viewing this topic.

EMD

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Noofhampton
  • Posts: 3516
    • 95t
    • View Profile
Fwd drive shaft play ?
« on: 27 January 2016, 14:22:28 »
Should there be any play on the front drive shafts  :-\ Im getting a slight grinding rotational noise when turning left on the front , checked for play in wheel bearing and no play in them at all and looks like new drive shafts have recently been fitted  :-\ Mazda 2.0 Premacy .
« Last Edit: 27 January 2016, 14:24:13 by EMD »
Logged
Omegatitis

05omegav6

  • Guest
Re: Fwd drive shaft play ?
« Reply #1 on: 27 January 2016, 14:25:16 »
Worn cvs tend to knock :-\
Logged

EMD

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Noofhampton
  • Posts: 3516
    • 95t
    • View Profile
Re: Fwd drive shaft play ?
« Reply #2 on: 27 January 2016, 14:26:47 »
Quote from: Harris K Telemacher on 27 January 2016, 14:25:16
Worn cvs tend to knock :-\

Yeah thats what i thought but its just a grinding noise , gets worse when slung into a corner  :-\
Logged
Omegatitis

STEMO

  • Guest
Re: Fwd drive shaft play ?
« Reply #3 on: 27 January 2016, 15:00:09 »
Oooooo......mazda.......not cheap.
Logged

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 11070
    • Ghastly 1.0l Focus
    • View Profile
Re: Fwd drive shaft play ?
« Reply #4 on: 27 January 2016, 17:25:13 »
Quote from: Harris K Telemacher on 27 January 2016, 14:25:16
Worn cvs tend to knock :-\


Then they explode into a mess of ball bearings and broken bits of cage. The flapping driveshaft tends to make a nasty clanking noise too.
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39797
    • ML350 TDM SmartRoadster
    • View Profile
Re: Fwd drive shaft play ?
« Reply #5 on: 27 January 2016, 17:35:58 »
Quote from: STEMO on 27 January 2016, 15:00:09
Oooooo......mazda.......not cheap.

A good few years back I needed a CV joint BOOT for SWMBO's Hyundai Lantra so I phoned the main dealership for a price. £30-odd !!!!  :o :o I'd recently bought the full CV joint, boot and sachet of molly grease for a MKII Cavalier for the same money at the local motorfactors  :y
Logged

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
Re: Fwd drive shaft play ?
« Reply #6 on: 27 January 2016, 17:53:41 »
I had a similar noise in a Morris 1100 in 1966. Changing the front wheel bearing seemed to cure it for a while, then it returned. It turned out to be the wheel bearing outer turning in the hub, the cure was to punch small dents in the hub to hold the bearing tighter.
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39797
    • ML350 TDM SmartRoadster
    • View Profile
Re: Fwd drive shaft play ?
« Reply #7 on: 27 January 2016, 18:05:49 »
Quote from: terry paget on 27 January 2016, 17:53:41
....
the cure was to punch small dents in the hub to hold the bearing tighter.

A common 'fix' at work too .... plus a bottle of bearing fit  ;D ;D
Logged

EMD

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Noofhampton
  • Posts: 3516
    • 95t
    • View Profile
Re: Fwd drive shaft play ?
« Reply #8 on: 27 January 2016, 19:05:34 »
Quote from: terry paget on 27 January 2016, 17:53:41
I had a similar noise in a Morris 1100 in 1966. Changing the front wheel bearing seemed to cure it for a while, then it returned. It turned out to be the wheel bearing outer turning in the hub, the cure was to punch small dents in the hub to hold the bearing tighter.

Could be that  :-\ Ive done my best at the checks but handing it over to serek next week for him to have a look . I cant see anything thats causing it  :(
Logged
Omegatitis

plym ian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Plymouth, Devon
  • Posts: 2997
    • 2.0 insignia elite tourer
    • View Profile
Re: Fwd drive shaft play ?
« Reply #9 on: 27 January 2016, 19:20:35 »
Teach you for having the wrong wheel drive ;D
Logged

ronnyd

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Bury St Edmunds Suffolk
  • Posts: 9257
    • Vectra 1.8 SRI Silver
    • View Profile
Re: Fwd drive shaft play ?
« Reply #10 on: 27 January 2016, 21:29:40 »
Quote from: Andy B link=topic=134272.msg1723136#m Dot punch was a very handysg1723136 date=1453917949
Quote from: terry paget on 27 January 2016, 17:53:41
....
the cure was to punch small dents in the hub to hold the bearing tighter.

A common 'fix' at work too .... plus a bottle of bearing fit  ;D ;D
That was a common fix when i worked in engineering (centre lathe turner). turned a o/sized bore into a snug fit :y. Dot punch was a very handy tool. :D
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39797
    • ML350 TDM SmartRoadster
    • View Profile
Re: Fwd drive shaft play ?
« Reply #11 on: 27 January 2016, 21:40:36 »
Quote from: ronnyd on 27 January 2016, 21:29:40
....
 ..... (centre lathe turner).  ....

I've a City & Guilds somewhere for that  :y
Logged

henryd

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • west cornwall
  • Posts: 8806
  • VW Touareg R5 tdi Auto
    • View Profile
Re: Fwd drive shaft play ?
« Reply #12 on: 28 January 2016, 18:51:15 »
Quote from: Andy B on 27 January 2016, 21:40:36
Quote from: ronnyd on 27 January 2016, 21:29:40
....
 ..... (centre lathe turner).  ....

I've a City & Guilds somewhere for that  :y

Me too,Miller as well :y :y
Logged
other rides 
  mk3 Volvo v70 2.0 Diesel ,Citroen C2, Pug 306 cabriolet
  Sterling elite trekker pikey wagon
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.