Topic: Sprung washers that hold estate spare wheel flap latch (Read 1061 times)

terry paget · « **on:** 29 January 2016, 14:02:27 »

The latch that holds down the spare wheel flap on estates is attached to the flap by 5 little sprung washers, which push on to pins and hold the 2 halves together. Similar washers retain the door trims. The washers are missing on my Clacton estate. Vx do not stock them, I cannot get any at a local factor or see then in the Screwfix catalogue. The trim pins are 4mm in diameter, the latch pins are 3mm. Where can I get some?

Nick W · « **Reply #1 on:** 29 January 2016, 14:23:35 »

I'll have a look at mine when I get home, as I am not sure what you mean.

05omegav6 · « **Reply #2 on:** 29 January 2016, 14:37:21 »

Quote from: Nick W on 29 January 2016, 14:23:35

I'll have a look at mine when I get home, as I am not sure what you mean.

Theses I think...

http://www.ebay.co.uk/itm/50-piece-Assortment-Starlock-Washers-Push-on-Clips-for-Metric-Shaft-/231233676134?_trksid=p2141725.m3641.l6368

$:-\$

terry paget · « **Reply #3 on:** 29 January 2016, 14:57:32 »

Thanks chaps. Starlock push on washers they are. Once I had the name I found lots of suppliers, man will sell me 10 3mm washers for £1.75 inc. postage. Isn't e-bay wonderful! Yesterday I bought a reversing light switch for £2.75 delivered.

News:

Author Topic: Sprung washers that hold estate spare wheel flap latch (Read 1061 times)

terry paget

Sprung washers that hold estate spare wheel flap latch

Nick W

Re: Sprung washers that hold estate spare wheel flap latch

05omegav6

Re: Sprung washers that hold estate spare wheel flap latch

terry paget

Re: Sprung washers that hold estate spare wheel flap latch