News:

Welcome to OOF - the online resource for all things Vauxhall/Opel Omega-B

Main Menu

Overly tight dust caps.

Started by Field Marshal Dr. Opti, 14 February 2016, 18:29:02

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Field Marshal Dr. Opti

I can't believe how tight they are.

Even gripping the rubber valve stem with a pair of pliers wrapped in a rag, combined with a socket on the hexagonal cap, won't shift the little bastard. :-\


Lazydocker

Metal ones?

Leave alone, take to a tyre place and then try removing so they can stick new valves in for you easily enough ;)
Whatever it is... I didn't do it

Field Marshal Dr. Opti

Quote from: Lazydocker on 14 February 2016, 18:30:13
Metal ones?

Leave alone, take to a tyre place and then try removing so they can stick new valves in for you easily enough ;)

Yep......complete with natty Vauxhall logo. :-\

TheBoy

The metal caps and the valve thread corrode and stick. If you reuse, grease lightly to reduce reoccurrence.
Grumpy old man

Lazydocker

Quote from: Doctor Opti on 14 February 2016, 18:31:45
Quote from: Lazydocker on 14 February 2016, 18:30:13
Metal ones?

Leave alone, take to a tyre place and then try removing so they can stick new valves in for you easily enough ;)

Yep......complete with natty Vauxhall logo. :-\

Leave well alone until you can get to a tyre place ;)

I've experienced it ::) Well, my neighbour has ::)
Whatever it is... I didn't do it

STEMO

Chisel the little fickers off  :y

Field Marshal Dr. Opti

Quote from: TheBoy on 14 February 2016, 18:38:42
The metal caps and the valve thread corrode and stick. If you reuse, grease lightly to reduce reoccurrence.

No problems with plastic caps. :-\

YZ250

Quote from: Doctor Opti on 14 February 2016, 18:31:45
Quote from: Lazydocker on 14 February 2016, 18:30:13
Metal ones?

Leave alone, take to a tyre place and then try removing so they can stick new valves in for you easily enough ;)

Yep......complete with natty Vauxhall logo. :-\

I had to saw part way through mine and then split them down the side. I put Molyslip on the replacements and kept getting them nicked so I gave up and switched back to plastic caps.    ::)
My fun car is a 2020 Bmw F32 430d M Sport with indicators.
My cruiser is an Audi A6 Avant S Line Black Edition with indicators.

flyer 0712

Yep  i had ali ones and they corroded to the valve......all i did was used a hacksaw blade and carefully cut a slit and then prized open with a small screw driver...only use plastic ones now.. ;D ;D

henryd

Quote from: Doctor Opti on 14 February 2016, 18:29:02
I can't believe how tight they are.

Even gripping the rubber valve stem with a pair of pliers wrapped in a rag, combined with a socket on the hexagonal cap, won't shift the little bastard. :-\

Metal caps are a bloody nuisance,a Dremel with a cutting wheel makes light work of them :y
other rides 
  mk3 Volvo v70 2.0 Diesel , Pug 306 cabriolet, Pug 308 gt 180
  Sterling elite trekker pikey wagon

Andy B

Quote from: henryd on 14 February 2016, 22:39:55
.....

Metal caps are a bloody nuisance,a Dremel with a cutting wheel makes light work of them :y

...... makes mental note to check the metal dust caps on the Merc before it goes back to Mercedes again again (not a typo) for for them to sort the Airmatic  ???

Sir Tigger KC

So you didn't use a torque wrench when you last put them back on?  ::)  :D
RIP Paul 'Luvvie' Lovejoy

Politically homeless ......

Field Marshal Dr. Opti

Quote from: Andy B on 15 February 2016, 00:36:00
Quote from: henryd on 14 February 2016, 22:39:55
.....

Metal caps are a bloody nuisance,a Dremel with a cutting wheel makes light work of them :y

...... makes mental note to check the metal dust caps on the Merc before it goes back to Mercedes again again (not a typo) for for them to sort the Airmatic  ???

I thought it had been sorted already, Mr B...eanz.

Andy B

Quote from: Doctor Opti on 15 February 2016, 11:35:59
Quote from: Andy B on 15 February 2016, 00:36:00
Quote from: henryd on 14 February 2016, 22:39:55
.....

Metal caps are a bloody nuisance,a Dremel with a cutting wheel makes light work of them :y

...... makes mental note to check the metal dust caps on the Merc before it goes back to Mercedes again again (not a typo) for for them to sort the Airmatic  ???


I thought it had been sorted already, Mr B...eanz.

It should have been. When I spoke to the service manager earlier in the week, he'd said they couldn't find a fault, he'd looked at it each morning & evening & it'd behaved  :-\. I collected the car again last Thursday, but by the following morning it'd already got a list on it .... 20 mm difference between each side and a few hours later it'd dropped another 10mm on the driver's side. I've just dropped it off with them again but before I started it up the front was stupidly low. I'll mightily p'd off if they try the no fault found again routine. I sent him yet more pictures on Friday of what it looks like so he can't claim that I'm making it up.

Field Marshal Dr. Opti

Quote from: Andy B on 15 February 2016, 12:21:00
Quote from: Doctor Opti on 15 February 2016, 11:35:59
Quote from: Andy B on 15 February 2016, 00:36:00
Quote from: henryd on 14 February 2016, 22:39:55
.....

Metal caps are a bloody nuisance,a Dremel with a cutting wheel makes light work of them :y

...... makes mental note to check the metal dust caps on the Merc before it goes back to Mercedes again again (not a typo) for for them to sort the Airmatic  ???


I thought it had been sorted already, Mr B...eanz.

It should have been. When I spoke to the service manager earlier in the week, he'd said they couldn't find a fault, he'd looked at it each morning & evening & it'd behaved  :-\. I collected the car again last Thursday, but by the following morning it'd already got a list on it .... 20 mm difference between each side and a few hours later it'd dropped another 10mm on the driver's side. I've just dropped it off with them again but before I started it up the front was stupidly low. I'll mightily p'd off if they try the no fault found again routine. I sent him yet more pictures on Friday of what it looks like so he can't claim that I'm making it up.

It makes you wonder how hard they looked. :-\