News:

Welcome to OOF - the online resource for all things Vauxhall/Opel Omega-B

Main Menu

anyone ever used brembo discs and pads on their omega?

Started by Webby the Bear, 25 April 2016, 20:04:30

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Webby the Bear

Just wondering as eurocrapparts have them listed at a very similar price to the pagid ones.  :y
RIP Paul Lovejoy

Webby the Bear

RIP Paul Lovejoy

serek

had brembo before and tbh they not that good
I would give try for pagid

Edit: on stock brake system I would go for GM set up

frostbite

Plus 1 for paid.  I had Brembo on my merc and the road salt ruined them,  I had mintex on the 2.5cdx

Leave eicher well alone. The front pads friction material cracked down the middle on my v70 complete junk if I had kept the receipt ECP would have had an ear full
e46 325i se - 1.8vvti avensis liftback

biggriffin

Hoof'land storeman.

Diamond Black Geezer

I run GM all round and very happy, Mr The Bear  :)
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Marks DTM Calib

Pagid are rubbish, used to be ok but over the last year or two they have fallen off a cliff.


TheBoy

Not sure if its ECP selling duff stuff again, but Pagid pads are now awful.  As said, that may be either ECP up to their old tricks, or Pagid make (or rebadge) some real shite for ECP to hit a price point.  But I'd avoid them.

Ignoring the Tradeclub pad, cheap pads are universally crap. Be that the truly awful Mintex or non brand ones.

Traditionally, pad makers like Mintex used to sell a decent pad (at a price) and a low cost pad for cheap suppliers.  Mostly, these makers have dropped the high price ones for business reasons.

Maybe Brembo still have the dual prong approach, but fair to say if sub £20, they are going to be shite.


As said, TC seems a reliable exception, though they are not perfect.  If left for a few days unused, they need a little heat in them before they properly bite.  But if looking for a £20 pad set, nothing I've come across on the Omega comes even remotely close.  And I put my money where my mouth is - the MV6 runs TC pads (TBE runs GM OE pads)
Grumpy old man

biggriffin

The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.
Hoof'land storeman.

Marks DTM Calib

Quote from: biggriffin on 26 April 2016, 20:15:09
The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.

Irrelevant sadly, the issue I have had is I have fitted 6 sets in the last 18 months to a number of different vehicles based on previous good experience, on all but one of the vehicles the discs are shot and the pads failing (two have cracked).


Andy H

Quote from: Marks DTM Calib on 26 April 2016, 21:57:51
Quote from: biggriffin on 26 April 2016, 20:15:09
The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.

Irrelevant sadly, the issue I have had is I have fitted 6 sets in the last 18 months to a number of different vehicles based on previous good experience, on all but one of the vehicles the discs are shot and the pads failing (two have cracked).
Got me worried now. :(
A year ago I bought Pagid discs and pads (from ECP) for a newly acquired Ford Galaxy. All the existing discs looked as rough as a badgers arse but when I pulled the wheels off and measured disc and pad thickness they were barely worn so I left them.
I fitted the Pagid discs & pads last month - so far they have been excellent.
How long did the sets you fitted last? and  what vehicles were they fitted to?
"Deja Moo - The feeling that you've heard this bull somewhere before."

Marks DTM Calib

Quote from: Andy H on 26 April 2016, 22:25:09
Quote from: Marks DTM Calib on 26 April 2016, 21:57:51
Quote from: biggriffin on 26 April 2016, 20:15:09
The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.

Irrelevant sadly, the issue I have had is I have fitted 6 sets in the last 18 months to a number of different vehicles based on previous good experience, on all but one of the vehicles the discs are shot and the pads failing (two have cracked).
Got me worried now. :(
A year ago I bought Pagid discs and pads (from ECP) for a newly acquired Ford Galaxy. All the existing discs looked as rough as a badgers arse but when I pulled the wheels off and measured disc and pad thickness they were barely worn so I left them.
I fitted the Pagid discs & pads last month - so far they have been excellent.
How long did the sets you fitted last? and  what vehicles were they fitted to?

Fitted to:

1 off Zafira B (mine) - 14 months on pads cracked and discs have high spots (I never sit with foot on brake) and wear grooves
1 off Corsa C - Cracked pads, circa 5 months
2 off Omegas - 1 ok and the other showing grooved discs and pad failure
1 off BMW 5 series - As per Omega,
1 off Focus - As per Omega

TheBoy

Quote from: Marks DTM Calib on 26 April 2016, 21:57:51
Quote from: biggriffin on 26 April 2016, 20:15:09
The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.

Irrelevant sadly, the issue I have had is I have fitted 6 sets in the last 18 months to a number of different vehicles based on previous good experience, on all but one of the vehicles the discs are shot and the pads failing (two have cracked).
I have experienced poor braking performance and premature overheating, both on the ones I've had on my own car (from ECP), and those fitted to other peoples cars (again, ECP).
Grumpy old man

frostbite

Quote from: TheBoy on 27 April 2016, 18:08:09
Quote from: Marks DTM Calib on 26 April 2016, 21:57:51
Quote from: biggriffin on 26 April 2016, 20:15:09
The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.

Irrelevant sadly, the issue I have had is I have fitted 6 sets in the last 18 months to a number of different vehicles based on previous good experience, on all but one of the vehicles the discs are shot and the pads failing (two have cracked).
I have experienced poor braking performance and premature overheating, both on the ones I've had on my own car (from ECP), and those fitted to other peoples cars (again, ECP).

Is overheating when the rear discs go blue?
e46 325i se - 1.8vvti avensis liftback

TheBoy

Quote from: frostbite on 27 April 2016, 18:13:51
Quote from: TheBoy on 27 April 2016, 18:08:09
Quote from: Marks DTM Calib on 26 April 2016, 21:57:51
Quote from: biggriffin on 26 April 2016, 20:15:09
The pagdid stuff is all tuv approved, and if it were to be below standard, the Germans would, throw the book at them, reference GM few years back for selling pads below OE quality.

Irrelevant sadly, the issue I have had is I have fitted 6 sets in the last 18 months to a number of different vehicles based on previous good experience, on all but one of the vehicles the discs are shot and the pads failing (two have cracked).
I have experienced poor braking performance and premature overheating, both on the ones I've had on my own car (from ECP), and those fitted to other peoples cars (again, ECP).

Is overheating when the rear discs go blue?
Any car can easily do that quite quickly. My definition is when the pad's effectiveness reduces considerably.
Grumpy old man