Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Fault code 0330  (Read 1252 times)

0 Members and 1 Guest are viewing this topic.

raymie440

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 44
    • 3.2 v6 Elite
    • View Profile
Fault code 0330
« on: 05 June 2016, 12:30:46 »
Hi all, took the car on a good run yesterday, car is running great but the spanner symbol would show now and again then disappear again. Pedal read this morning shows code 0330 and having checked the codes I believe it to be the knock sensor. Should I be concerned about this and what are the possible causes and fix. I am planning to give the car a full service next week so I could do or check anything then. Thanks in advance you lovely oofers!
Logged

raymie440

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 44
    • 3.2 v6 Elite
    • View Profile
Re: Fault code 0330
« Reply #1 on: 16 June 2016, 21:43:52 »
Quick update, changed the knock sensor, serviced the car, out on test drive, boom light on again. Now thinking it may be the coil pack, when I changed the plugs the wells were full of oil. Any ideas?
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29914
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Fault code 0330
« Reply #2 on: 17 June 2016, 03:42:19 »
Clean the breathers and replace the camcover gaskets before you kill the coil packs ;)
Logged
Onanists always think outside the box.

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106977
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Fault code 0330
« Reply #3 on: 17 June 2016, 07:20:14 »
Get a meter out and check the loom from ecu to knock sensor.

Ultimately, the code means the ECU is not getting a valid signal from it.
Logged
Grumpy old man

tigers_gonads

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Kinston Upon Hull
  • Posts: 8610
  • Driving a Honda CR-V which doesn't smell of pee
    • Honda CR-V
    • View Profile
Re: Fault code 0330
« Reply #4 on: 17 June 2016, 12:48:53 »
Quote from: TheBoy on 17 June 2016, 07:20:14
Get a meter out and check the loom from ecu to knock sensor.

Ultimately, the code means the ECU is not getting a valid signal from it.


If you don't feel competent with a test meter, check you haven't trapped the knock sensor wire when you fitted it  ;)
Normal spot is behind the alternator if it isn't clipped up perfect  ;)

Guess how I know that  ::) :-[
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.