Gentlemen, I am perplexed. This time I took great care installing the left hand cam cover gasket. I used as new Vx gaskets, I achieved maximum access by removing the scuttle, cam sensor, hanging the wiring out of the way on the corner of the scuttle, and releasing the aircon pipe front screw. I applied the black sealant to all the sharp corners. After practising with a spare cam cover, I manoeuvred the cam cover with gaskets into place. I inserted the 8 screws and carefully torqued them up to 8Nm. I reassembled the engine, left it overnight for sealant to set. I took it for a 10 miles drive this morning.
It still leaks. Under the car there is oil. Looking under the cam cover with a mirror on a stick, it comes out dripping with warm oil.
I wonder what I did wrong, or failed to do. Please advise.
Pic follows of my access to place cam cover to head.
[img]https://www.dropbox.com/s/nku9fhd5sr3mn9a/LHcamsCLEARED.jpg?dl=1[img]