Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed  (Read 6209 times)

0 Members and 1 Guest are viewing this topic.

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30139
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed
« Reply #15 on: 15 December 2017, 22:51:52 »
For the record on the key front, the remote is presumed to be original to the car*, the key/chip/locks/ecu are all from an unknown 2.6 auto via ebay.

Might be summat written on the wrapping (with the old ecu etc last I saw).

Alarm/locking ecu and gearbox ecu are also presumed original to the car. *

*Presumed as I never changed them ;)
Logged
Onanists always think outside the box.

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11444
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed
« Reply #16 on: 16 December 2017, 11:53:43 »
2.6 in a 3.2 will work and gets you out of trouble (got that T shirt) but it is a different Map, the 3.2 Maps are a bit more aggressive.  ;)

The other problem that can show its head is, If yours is a Ex Plod 3.2 Manual is the Auto ECU in a Manual, that can also cause issues. 
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30139
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed
« Reply #17 on: 16 December 2017, 15:38:19 »
Quote from: zirk on 16 December 2017, 11:53:43
2.6 in a 3.2 will work and gets you out of trouble (got that T shirt) but it is a different Map, the 3.2 Maps are a bit more aggressive.  ;)

The other problem that can show its head is, If yours is a Ex Plod 3.2 Manual is the Auto ECU in a Manual, that can also cause issues.
In this case both autos and no mid, so no annoying message 8)
Logged
Onanists always think outside the box.

Lincs Robert

  • Guest
Re: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed
« Reply #18 on: 16 December 2017, 16:14:29 »
Quote from: Nick W on 15 December 2017, 17:13:20
We've obviously got different ideas of the ballache involved :y 
And you did say you were time limited, so getting it done on Monday(for instance) would be worth something to me.


I don't drill out shear bolts, but weld an ordinary one to them then loosen with a normal spanner.

The time I did this I used a small and very sharp cold chisel -with a short, sharp shock from sammy sledge!  :y
Logged

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11444
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed
« Reply #19 on: 17 December 2017, 00:06:30 »
Quote from: Doctor Gollum on 16 December 2017, 15:38:19
Quote from: zirk on 16 December 2017, 11:53:43
2.6 in a 3.2 will work and gets you out of trouble (got that T shirt) but it is a different Map, the 3.2 Maps are a bit more aggressive.  ;)

The other problem that can show its head is, If yours is a Ex Plod 3.2 Manual is the Auto ECU in a Manual, that can also cause issues.
In this case both autos and no mid, so no annoying message 8)
yea, wasnt really thinking about the MID, more along the lines when a 3.2 Manual fitted with a 3.2 Auto ECU, decides to wake up one morning and realises theres no Auto Box fitted, throw a Code and refuses to start, could take days, months or years but seems to decide that sooner or later.   :(
Logged

GastronomicKleptomaniac

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Teesside (the nice bit)
  • Posts: 4071
    • 3.2 plod, 2.6 MV6, etc
    • View Profile
Re: ECU, Key, Chip and Receiver for 2.6 / 3.2 needed
« Reply #20 on: 06 January 2018, 19:27:41 »
It is possible to reprogram a 3.2 auto ECU to manual, using Tech 2. :y
Logged
Servicing and repairs done in NE. Special rates for OOFers! PM me.
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.01 seconds with 15 queries.