News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

bolts for the wish bones and wishbones if possible *** URGENT***

Started by Elite_L0ver, 13 October 2018, 22:01:25

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Elite_L0ver

*** URGENT***


Wishbone Bolts GM passanger side but both if there are some around.

Im in urgent need of these as one snapped on me tonight previous owner has used the wrong bolts replacing wishbones close to Hampshire if possible please any one can help. My mig is up on stands until I sort this if possible also a centre armrest for 2003 saloon

Many Thanks
Likes My Music LOUD!!!!

Elm327 code reader And OP COM available Locally PM Me

Doctor Gollum

Onanists always think outside the box.

Elite_L0ver

Quote from: Doctor Gollum on 14 October 2018, 02:05:00
Front or rear as they are different lengths...
I need both rear and front i would prefer to replace both sides whilst at it so 2 of each

Likes My Music LOUD!!!!

Elm327 code reader And OP COM available Locally PM Me

biggriffin

Quote from: Doctor Gollum on 14 October 2018, 02:05:00
Front or rear as they are different lengths...
.

Well I've just taken two from a 2000my plod, both the same...

Plot thickens,,,, So I've two bolts,, both 21mm socket size 85mm,. ish,(can't find vernier) tape measure.  :o couldn't find nuts it's dark.... :)
Hoof'land storeman.

Doctor Gollum

Don't think I have any left... But rear one is shorter. 12 mm or so from memory :-\

Obviously, they are otherwise the same as they use the same nuts. But using the longer bolts for the vertical bush potentially places the bolt tip down towards becoming the lowest point of the car...
Onanists always think outside the box.