Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2]  All   Go Down

Author Topic: Should X20XEV HEAD BE SKIMMED  (Read 7170 times)

0 Members and 1 Guest are viewing this topic.

addy

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • County Durham.  UK
  • Posts: 691
    • 2.6 CD Saloon 2ltr omega
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #15 on: 01 December 2018, 15:34:55 »
Well checked head with new rule and it looks like the head is ok. :y
Logged
Drives 1995 2.0ltr CD Estate.  2002 2.6 CD saloon

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7869
    • omega b2 2.6 cdxi
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #16 on: 01 December 2018, 16:34:26 »
Quote from: addy on 01 December 2018, 15:34:55
Well checked head with new rule and it looks like the head is ok. :y
so what is the pitting like ?
the plus side of decking it yourself is you can take the bare minimum off  :y

Logged

addy

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • County Durham.  UK
  • Posts: 691
    • 2.6 CD Saloon 2ltr omega
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #17 on: 01 December 2018, 17:57:41 »
I did a pencil rubbing and just light surface marks, hardly notice. Mainly around the water holes at the top of the head in the pictures above, you can see they are darker, they look like rust blemishes from the gasket(hope that makes sense).
Logged
Drives 1995 2.0ltr CD Estate.  2002 2.6 CD saloon

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30351
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #18 on: 01 December 2018, 18:07:03 »
R before the part number is a VX exchange number.

Car has previously had a head replacement.  ;)
Logged
Onanists always think outside the box.

addy

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • County Durham.  UK
  • Posts: 691
    • 2.6 CD Saloon 2ltr omega
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #19 on: 01 December 2018, 18:35:55 »
That might explain why some of the head bolts, didn't seem hard to undo(maybe one of the reasons the gasket went?). Also all the other bolts from exhaust and intake came out easy.
Logged
Drives 1995 2.0ltr CD Estate.  2002 2.6 CD saloon

andyc

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Norfolk
  • Posts: 1273
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #20 on: 01 December 2018, 20:14:38 »
Part Numbers on the casings mean nothing at all they are just used as ref numbers by GM. Those numbers will not be found on EPC. Only way to check if a second hand head will fit your car is to cross ref both vehicle VINs

Andy
Logged
Iceni Automotive. Classic Vauxhall/Opel Specialist. Service, Repairs, Restoration
Thetford. Norfolk

Enceladus

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 1107
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #21 on: 02 December 2018, 07:03:21 »
What's the height of the head you have? Factory spec is 134mm for X20XEV head. So if it's measurably less than that then it's been skimmed at least once regardless of where it came from, factory original or a replacement.
Logged

addy

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • County Durham.  UK
  • Posts: 691
    • 2.6 CD Saloon 2ltr omega
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #22 on: 02 December 2018, 11:13:57 »
The head is 134mm, checked it in different places. :y
Logged
Drives 1995 2.0ltr CD Estate.  2002 2.6 CD saloon

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7869
    • omega b2 2.6 cdxi
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #23 on: 02 December 2018, 11:35:31 »
Quote from: addy on 02 December 2018, 11:13:57
The head is 134mm, checked it in different places. :y
so if the pitting is minimal, a light DIY surface finish (head and block ) sounds like a good way to go,rather than run the risk of a deep shave on a milling machine ,because they are lazy and will not clamp it accurately to take off 2 thou or less ,
money would be better spent on a better head gasket set,new head bolts,rather than cheapest you could find
but it's your engine, so your choice
an opportunity to check/de-glaze the bores ,give the cooling system a good flush etc etc 
Logged

Enceladus

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 1107
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #24 on: 02 December 2018, 11:40:31 »
Never skimmed then. Since it's flat with no deep corrosion you could clean it up as per 'dave the builder's' advice above and put it back on. New bolts and studs.
Logged

omegod

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • liverpool
  • Posts: 4348
    • 2017 Seat Ateca
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #25 on: 02 December 2018, 12:07:15 »
I have a perfect Z22XE engine sitting on a pallet with only 80k on it , was supplied new by VX a few years ago, may be easier than changing the head
Logged
Happy to do Omega servicing etc around Merseyside,cruise activation, airbag lights sorted too...

nellys coupe

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • buckinghamshire
  • Posts: 150
    • hyundai coupe
    • View Profile
Re: Should X20XEV HEAD BE SKIMMED
« Reply #26 on: 17 January 2019, 13:23:48 »
i would always skim an aluminum head as then can warp slightly when removing the head bolts.
Logged
coupe rebuild master
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.042 seconds with 17 queries.