News:

Welcome to OOF - the online resource for all things Vauxhall/Opel Omega-B

Main Menu

WTD: Oil Cooler plate o-rings/washers etc?

Started by Diamond Black Geezer, 24 June 2019, 23:03:55

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Diamond Black Geezer

Before walking into the stealer and offering my soul and first born, has anyone got any of the seals n bits n bobs you need for re-sealing the oil cooler plate, surplus?

I should have some grey sealant, and sure I have a few washers kicking around, but can't find the 'right' parts box at present. For reference:

11076852 METAL COOLER O-RING (x4)
93165267 SEALANT  (x1)
90409175 O-RING BETWEEN COOLER PLATE AND COOLER RADIATOR (x2)
12992647 COOLER BRIDGE SEAL (x4)

Ta in advance  :y
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Raeturbo

Laying a rubber road.

biggriffin

If those seals still available,cost you about £15 for the lot.
Hoof'land storeman.

Diamond Black Geezer

Quote from: Raeturbo on 25 June 2019, 09:44:28
What size O rings do you need?

I've done the job once before, so know 'roughly' from memory, but not exactly. I think they're badly named. They're all washers, as far as I'm concerned. I'd call an 'o-ring' rubber, and none of these are that. The 'cooler ring bridge seal' are doughty washers.

Quote from: biggriffin on 25 June 2019, 10:43:01
If those seals still available,cost you about £15 for the lot.

True, It's not horrific on the grand scheme of things (though some would argue extortionately priced compared with what you could pay for what are readily available universal parts used on almost all cars/other industries)

I just wanted to check as I like to keep money 'in the family' if I can give some sheckles to a fellow OOFer I will  :y
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Raeturbo

I've got a box of all sizes just measure them and I'll send them to you free!
Laying a rubber road.

Diamond Black Geezer

Ah, very kind sir! I'll see if I can get some dimensions!

I have one of those cheap n cheerful rubber o ring sets, but nothing in (what I assume are) crush washers, and doughty washers.  :)
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Raeturbo

Ahh if it's an o ring though it's rubber no doubt?
Laying a rubber road.

JamesV6CDX

I used Peugeot sump plug washers on Rae's coolant bridge. They fitted like a glove, and he hasn't complained yet  ;D

Diamond Black Geezer

 :y

Now found my box of bits, got the metal (aluminium?) crush washers, check. Found some unlabelled rubber o-rings (so two are rubber, apologies to Raeturbo, I forgot two of the 10 are rubber) which may be the coolant ones, need to confirm that. Found a website selling them cheaper than Vx prices. Dowty washers I have heard tale (Fuse19?) that pattern washers have let him down in the past, so although dowty washers can be had for pennies each, dont want to repeat this job again any time soon... Sourced 2 of the 4, so may be main dealer (£3odd each, ouch)

think my grey sealant has gone hard, too, now.... bugger!  :D
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Raeturbo

My car is awesome at the moment thanks to James :y :y
Laying a rubber road.

JamesV6CDX

Quote from: Diamond Black Geezer on 27 June 2019, 16:15:45
:y

Now found my box of bits, got the metal (aluminium?) crush washers, check. Found some unlabelled rubber o-rings (so two are rubber, apologies to Raeturbo, I forgot two of the 10 are rubber) which may be the coolant ones, need to confirm that. Found a website selling them cheaper than Vx prices. Dowty washers I have heard tale (Fuse19?) that pattern washers have let him down in the past, so although dowty washers can be had for pennies each, dont want to repeat this job again any time soon... Sourced 2 of the 4, so may be main dealer (£3odd each, ouch)

think my grey sealant has gone hard, too, now.... bugger!  :D

As before, I used two citroen/peugeot sump plug washers on Rae's coolant bridge, which had rubber inserts, and fitted like a glove.

In a time where parts for these things are fast becoming obselete, we must improvise :y

Diamond Black Geezer

This is very true. Thanks for the tip...

:y

PS did you use GM sealant? I notice one motorfactor which usually only deals in genuine Vx stuff is selling Elring's version of. Going by the logic that elring made the rocker gaskets/are an OEM (I think) do we reckon teh Elring version is going to be plenty good enough/anyone had experience of using their grey goo?  :-\
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Doctor Gollum

I was prepared to change the HG etc on a mid nineties Mercedes using a similar logic :y

The EPC even lists it as a valid alternative  :y
Onanists always think outside the box.

Diamond Black Geezer

The Elring specifically listed on EPC? Good news  :y
Ex-Dealer Kent-Moore Rear Wheel Bearing Tool available for hire, PM for details.

"There's no point in being grown up if you can't be childish sometimes." 4th Doctor

Doctor Gollum

Quote from: Diamond Black Geezer on 29 June 2019, 23:43:24
The Elring specifically listed on EPC? Good news  :y
Er not quite...

Reread my post ;)
Onanists always think outside the box.