News:

Welcome to OOF - the online resource for all things Vauxhall/Opel Omega-B

Main Menu

Urgent Help needed - Vauxhall Zafira

Started by zirk, 29 July 2019, 18:43:25

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

zirk

Thinking out loud is there any way I can force the acessary timer on that work the windows

dave the builder

Quote from: zirk on 29 July 2019, 20:03:22
Currently got both cowlings off despite the wheel being locked, how does the plastic switch end bit come off the barrel before I end up breaking something.

Also looks like 4 wires going to Ing Switch amy ideas which is which.
there are 2 tabs to squeeze to remove the ignition electric switch BUT I think you need the ignition barrel removed to slide it out , sorry
you can force it towards the passenger side with a flat blade screwdriver ,and break the tabs ,freeing the switch, then turn the switch with a key or screwdriver to on ( to do the windows up) but you'll need a new switch when you rebuild it all

zirk

Quote from: dave the builder on 29 July 2019, 20:12:35
Quote from: zirk on 29 July 2019, 20:03:22
Currently got both cowlings off despite the wheel being locked, how does the plastic switch end bit come off the barrel before I end up breaking something.

Also looks like 4 wires going to Ing Switch amy ideas which is which.
there are 2 tabs to squeeze to remove the ignition electric switch BUT I think you need the ignition barrel removed to slide it out , sorry
you can force it towards the passenger side with a flat blade screwdriver ,and break the tabs ,freeing the switch, then turn the switch with a key or screwdriver to on ( to do the windows up) but you'll need a new switch when you rebuild it all
can only see 1 tab at the front

zirk

What if I stuff 12v on thd main Ing. Fuse ???

dave the builder

Quote from: zirk on 29 July 2019, 20:16:31
Quote from: dave the builder on 29 July 2019, 20:12:35
Quote from: zirk on 29 July 2019, 20:03:22
Currently got both cowlings off despite the wheel being locked, how does the plastic switch end bit come off the barrel before I end up breaking something.

Also looks like 4 wires going to Ing Switch amy ideas which is which.
there are 2 tabs to squeeze to remove the ignition electric switch BUT I think you need the ignition barrel removed to slide it out , sorry
you can force it towards the passenger side with a flat blade screwdriver ,and break the tabs ,freeing the switch, then turn the switch with a key or screwdriver to on ( to do the windows up) but you'll need a new switch when you rebuild it all
can only see 1 tab at the front
pic (the T at the top will snap with force )

lever this part off the rest with a flat screwdriver


Mods please remove this when Zirk is sorted

dave the builder

#20
switch is less than £10 ,new barrel is about the same from ebay
I did this recently on one of our astra G ,ignition barrel snapped the nipple off that goes into the switch
but I'b be wiggling the key /steering first until the key came out or snapped ,because it needs to be removed sooner or later  ;D

zirk

Right I managed to break the end cap off the switch but still cant remove switch. I have 4 wire, going clockwise starting at 1oclock, 1. Black wire red stripe, 2 Black wire, 3, black wire, 4, thinner small red wire ???

dave the builder

I don't have a wiring diagram and i just forced the switch off the column ,which works


zirk

Quote from: dave the builder on 29 July 2019, 20:42:30
I don't have a wiring diagram and i just forced the switch off the column ,which works
ok the switch looks different to your pic, or its got more plastic added, so you reckon just snap it off

dave the builder

#24
1 part is the connector block with wires, then the switch , then the housing
you need to lever between the housing and the switch to force 2 sections away (the switch AND the connector block )
sounds like so far, you just got the cover off the connector block

zirk

Ok managed to break the switch off with my hand and a piece of wood. Ing is on but the windows are not working ffs.

dave the builder

turn the switch a further turn (out of gear in case it is in 2 position )

zirk

Quote from: dave the builder on 29 July 2019, 21:04:42
turn the switch a further turn (out of gear in case it is in 2 position )
have engine running Dave.

dave the builder

you may have to remove the fob from the horseshoe of the key, turn the switch to off with screwdriver, then put fob back by ring , then turn switch (imobilizer sequence ,as id you where doing it with a key)

Quote from: zirk on 29 July 2019, 21:05:32
Quote from: dave the builder on 29 July 2019, 21:04:42
turn the switch a further turn (out of gear in case it is in 2 position )
have engine running Dave.
scrap what i just typed then

do the windows not go up now  :-\

zirk

Quote from: dave the builder on 29 July 2019, 21:08:22
you may have to remove the fob from the horseshoe of the key, turn the switch to off with screwdriver, then put fob back by ring , then turn switch (imobilizer sequence ,as id you where doing it with a key)

Quote from: zirk on 29 July 2019, 21:05:32
Quote from: dave the builder on 29 July 2019, 21:04:42
turn the switch a further turn (out of gear in case it is in 2 position )
have engine running Dave.
scrap what i just typed then

do the windows not go up now  :-\
no, dead.