News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

Urgent Help needed - Vauxhall Zafira

Started by zirk, 29 July 2019, 18:43:25

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

zirk

Just to add because I removed the Battery Ive now done window recycle and reset and key does dk total closure, fob doesnt though, sounds about right as my Corsa is the same key only. :-\

zirk

Quote from: Nick W on 29 July 2019, 22:12:11
Remove the lock barrel while it's still working, you need to be able to turn it to do so.
A new one is a good idea, which is quick and cheap if you don't mind another key, and a longer wait if you want one that matches your current key. Which is the best option
Ing barrel is still stuck solid, wont turn with the key, hench why I ended up snappinf the switch off Nick. So next task is to remove the barrel somehow with out breaking the alloy housing.

Could try drilling it but dont hold much hope on that one. Any ideas ?

Doctor Gollum

BFT or modify a flat screwdriver and apply some leverage with a scaffold bar to shear the lock and then remove as per instructions  :-\
Onanists always think outside the box.

zirk

Quote from: Doctor Gollum on 30 July 2019, 00:55:36
BFT or modify a flat screwdriver and apply some leverage with a scaffold bar to shear the lock and then remove as per instructions  :-\

Ok Ive just had 5 lots of BFT (Bacon and Fried Tomatos) now what ?


Doctor Gollum

Quote from: zirk on 30 July 2019, 02:36:29
Quote from: Doctor Gollum on 30 July 2019, 00:55:36
BFT or modify a flat screwdriver and apply some leverage with a scaffold bar to shear the lock and then remove as per instructions  :-\

Ok Ive just had 5 lots of BFT (Bacon and Fried Tomatos) now what ?
I was thinking more along the lines of Blunt Force Trauma/Batter Ta Fook, but at the end of a trying shift I must confess that bacon and tomatoes sounds like a good idea  :D
Onanists always think outside the box.

zirk

Quote from: Doctor Gollum on 30 July 2019, 02:49:39
Quote from: zirk on 30 July 2019, 02:36:29
Quote from: Doctor Gollum on 30 July 2019, 00:55:36
BFT or modify a flat screwdriver and apply some leverage with a scaffold bar to shear the lock and then remove as per instructions  :-\

Ok Ive just had 5 lots of BFT (Bacon and Fried Tomatos) now what ?
I was thinking more along the lines of Blunt Force Trauma/Batter Ta Fook, but at the end of a trying shift I must confess that bacon and tomatoes sounds like a good idea  :D
Well Im on my seventh one now and Im raring to go, so just need to get a Flat Screwdriver and do what with a Scafold Pole,     ......... Oh, hang on a Minuite need to suddenly go to the Loo,  :-[

Doctor Gollum

Basically you want to cobble summat together to release the steering lock. A crook lock might just give you enough leverage to get it done... :-\
Onanists always think outside the box.

BazaJT

It's a long long time since I looked but is the alloy housing still clamped round the steering column using shear bolts? If so would it not be less destructive to drill these out to release the housing?

Doctor Gollum

Quote from: BazaJT on 30 July 2019, 08:15:30
It's a long long time since I looked but is the alloy housing still clamped round the steering column using shear bolts? If so would it not be less destructive to drill these out to release the housing?
I suspect that the lock/barrel release is similar to the Omega ;)
Onanists always think outside the box.

dave the builder

continue rocking the steering and wiggling the key until it turns or breaks ,as per previous comments
.
if it turns ,remove the barrel ,if it snaps ,drill out enough to get a screwdriver in to act as a key and apply rotational force as you would the key) this may involve mole grips or spanner etc to give you leverage, to sheer the brass lock tumblers . or drill out enough to remove the tumblers / turn the barrel

a barrel with 2 keys is £10 , switch £10 , or less , a new or s/h housing with column  is ££ and a faf




terry paget

Quote from: dave the builder on 30 July 2019, 10:51:06
continue rocking the steering and wiggling the key until it turns or breaks ,as per previous comments
.
if it turns ,remove the barrel ,if it snaps ,drill out enough to get a screwdriver in to act as a key and apply rotational force as you would the key) this may involve mole grips or spanner etc to give you leverage, to sheer the brass lock tumblers . or drill out enough to remove the tumblers / turn the barrel

a barrel with 2 keys is £10 , switch £10 , or less , a new or s/h housing with column  is ££ and a faf
Really? To car pass specification? If so, my spare key dilemma is solved.

Nick W

Quote from: terry paget on 02 August 2019, 08:43:20
Quote from: dave the builder on 30 July 2019, 10:51:06
continue rocking the steering and wiggling the key until it turns or breaks ,as per previous comments
.
if it turns ,remove the barrel ,if it snaps ,drill out enough to get a screwdriver in to act as a key and apply rotational force as you would the key) this may involve mole grips or spanner etc to give you leverage, to sheer the brass lock tumblers . or drill out enough to remove the tumblers / turn the barrel

a barrel with 2 keys is £10 , switch £10 , or less , a new or s/h housing with column  is ££ and a faf
Really? To car pass specification? If so, my spare key dilemma is solved.


A matched cylinder will be more than £10, but it's worth paying so you only need one key.


Your spare key 'dilemma' is of your own making, and doesn't need such workarounds

dave the builder

Quote from: terry paget on 02 August 2019, 08:43:20
Quote from: dave the builder on 30 July 2019, 10:51:06
continue rocking the steering and wiggling the key until it turns or breaks ,as per previous comments
.
if it turns ,remove the barrel ,if it snaps ,drill out enough to get a screwdriver in to act as a key and apply rotational force as you would the key) this may involve mole grips or spanner etc to give you leverage, to sheer the brass lock tumblers . or drill out enough to remove the tumblers / turn the barrel

a barrel with 2 keys is £10 , switch £10 , or less , a new or s/h housing with column  is ££ and a faf
Really? To car pass specification? If so, my spare key dilemma is solved.
No Terry , just a pre cut set with no ID40 chip or remote fob
check your messages  :y

terry paget

Quote from: dave the builder on 02 August 2019, 09:34:57
Quote from: terry paget on 02 August 2019, 08:43:20
Quote from: dave the builder on 30 July 2019, 10:51:06
continue rocking the steering and wiggling the key until it turns or breaks ,as per previous comments
.
if it turns ,remove the barrel ,if it snaps ,drill out enough to get a screwdriver in to act as a key and apply rotational force as you would the key) this may involve mole grips or spanner etc to give you leverage, to sheer the brass lock tumblers . or drill out enough to remove the tumblers / turn the barrel

a barrel with 2 keys is £10 , switch £10 , or less , a new or s/h housing with column  is ££ and a faf
Really? To car pass specification? If so, my spare key dilemma is solved.
No Terry , just a pre cut set with no ID40 chip or remote fob
check your messages  :y
Reply sent.

terry paget


Fob is not the Omega fob. I presume the gold coloured piece is the chip.