z157 piece that fits under drivers side light

Started by Toledodude1973, 30 July 2019, 21:08:21

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Toledodude1973

Has anyone got a spare piece that fits under the main headlight in starsilver z157 please snapped it when fitting new unit :(
2002 omega slowly morphing into 2003 omega with increasing doner parts fitted

johnnydog

Yes, I have one in that colour
Sent you a pm.
2002 3.2 Elite saloon, 2003 3.2 Elite saloon & estate

Doctor Gollum

To save breaking the new one, fit as follows:

1.Fit headlight.
2.Insert outer edge of trim to the hole in the wing.
3.Carefully swing it towards the centre of the car ensuring that the two blades slot in to the top edge of the bumper.
4.Lift up the rubber trim from the inside corner of the light and carefully persuade the trim into position.
5.Fit the retaining pin.
6.Reattach the rubber trim to the headlight trim peg.

:y
Onanists always think outside the box.

Toledodude1973

Cheers DG i will go more careful with one from John
2002 omega slowly morphing into 2003 omega with increasing doner parts fitted

Toledodude1973

2002 omega slowly morphing into 2003 omega with increasing doner parts fitted