Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: 2006 Astra passed MOT, new track rods fine  (Read 1201 times)

0 Members and 1 Guest are viewing this topic.

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
2006 Astra passed MOT, new track rods fine
« on: 17 August 2019, 08:34:00 »
Yesterday DS06 passed its MOT, with no more advisories about worn track rods.
However, joy was restrained  by an entirely new (to me)  advisory, both rear suspension arm bushes worn. Haynes warns that changing these bushes require several special Vauxhall tools and is best left to a Vauxhall dealer.
Logged

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 11067
    • Ghastly 1.0l Focus
    • View Profile
Re: 2006 Astra passed MOT, new track rods fine
« Reply #1 on: 17 August 2019, 08:57:20 »
If the special Vx tool is anything like the Omega rear wheel bearing one, they'll be big, expensive, complicated and time consuming to use.


A quick Google for the bush shows that a common bush tool won't work due to the offset hole, but that isn't too hard to work around as this LINK shows.


I could make such a tool, but for £45 would just buy one.



Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107026
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: 2006 Astra passed MOT, new track rods fine
« Reply #2 on: 17 August 2019, 09:10:36 »
Or find a local garage, and let them do it.  That's what I did when a rear bearing went on the XJ.  The £50 labour was cheaper than the tools I'd need to get and likely never use again.
Logged
Grumpy old man

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 11067
    • Ghastly 1.0l Focus
    • View Profile
Re: 2006 Astra passed MOT, new track rods fine
« Reply #3 on: 17 August 2019, 09:50:07 »
That's why I like cheap generic tools as they can be readily modified - this was bought for my rear wheel bearing but has done others bearings and bushes as bought, and with some extra parts, things like Omega front wishbone bushes:





the silver parts I turned, and the studding is ordinary M10 from B&Q. Add a welder and you cobble together all sorts of ugly but effective tools, like my hub extractor.


Looking at these photos again, I wouldn't buy the Astra tool because the spacer for the eccentric could be quickly made from some plate using a grinder and files.
Logged

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7869
    • omega b2 2.6 cdxi
    • View Profile
Re: 2006 Astra passed MOT, new track rods fine
« Reply #4 on: 17 August 2019, 13:38:23 »
congratulations on the pass Terry  :)
I've never has the axle bushes wear to flag an advisory  :-\
I'd check them before buying anything, It's not the first time that an MOT tester has mis diagnosed or put advisories to get work  :-X
rear shocks and broken springs are common and cause rear rattle
you'd need to support both sides on axle stands under the brackets that hold the bushes,so that the rear beam can hang free  :y

IF the bushes are worn then just buy the tool that Nick kindly linked  :)
though the MOT manual states that bush wear for a 12mm bolt can be a couple of mm  ::)
a common MOT mistake  ::)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.009 seconds with 16 queries.