Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: High Idle- both banks running lean- vacuum leak fuel pressure regulator valve?  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

kman

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • connecticut
  • Posts: 15
    • 01 catera
    • View Profile
High Idle- both banks running lean- vacuum leak fuel pressure regulator valve?
« on: 03 November 2019, 11:17:52 »
Good Morning from Chilly Connecticut.
My 01 cadillac catera has a vacuum leak coming from under the plenum, back towards the firewall.  Symptoms are: loud vacuum leak sound, 2 error codes (lean on both banks), and and high idle, even when warmed up. If I carefully direct carb spray (not easy cause plenum in the way) at the fuel pressure regulator valve, it raises engine revs.  there are no fuel leaks at the valve, and the vacuum line connected to it is not cracked or disconnected.

Does this sound like a faulty fuel pressure regulator valve, or should I be looking/testing something else?
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 29779
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: High Idle- both banks running lean- vacuum leak fuel pressure regulator valve?
« Reply #1 on: 03 November 2019, 11:20:46 »
Split breather hose :y

They sit just behind the FPR and would easily inhale any spray...
Logged
Onanists always think outside the box.

Enceladus

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 1099
    • View Profile
Re: High Idle- both banks running lean- vacuum leak fuel pressure regulator valve?
« Reply #2 on: 03 November 2019, 16:00:40 »
Yes, have a look at the bigger bore 'Y' hose that connects the two outside ports of the breather bridge to the breather box at the back of the engine. The base of the hose can split under the hose clip. And the hose is hard to find, so be careful with it.

PITA to reach, you probably will need to remove the wiper arms and motor mechanism.

Logged

kman

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • connecticut
  • Posts: 15
    • 01 catera
    • View Profile
Re: High Idle- both banks running lean- vacuum leak fuel pressure regulator valve?
« Reply #3 on: 03 November 2019, 23:49:42 »
Oh wow thanks -gonna check that out first chance I get, will reply back shortly
Thanks for the tip mates ;)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.015 seconds with 16 queries.