Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GastronomicKleptomaniac]

Popped the exhaust on the project this morning. Discovered that the ink on my labels has run to a blur even worse than my normal handwriting.

Need to reconnect the lambda sensors. Can't remember where the cable was routed and the plugs clipped onto the car, so can't do it off cable length.

Anyone know the colours of the lambda wiring going in and coming out? The plugs are wired about-face to one another so if I know what colour wire off the sensor goes to which colour wire on the loom, I can work it out side to side.

[Stu.C]

My label hasn't faded away yet, so I can tell you pin C on the N/S sensor is (a very grimy) brown with a blue stripe 





Cheers, Stu

[GastronomicKleptomaniac]

You absolute diamond, thank you ever so much!

I'll be using my label maker next time I do a project car, lord knows why I never thought of that before...

[Stu.C]

 


The Dymo was my best purchase before stripping out the whole car, closely followed by a bulk buy of Ikea sandwich bags in every size they did. As soon as anything got removed, the loom got a label and the bolts or whatever went into a bag - labelled with a Sharpie.


Even a few weeks later I'd have been struggling to remember what some of the stuff was, never mind five years later as it is now 


Cheers, Stu

[GastronomicKleptomaniac]

I got two racks of little Really Useful Boxes for the same reason.

Unfortunately as I bought it as a partly deconstructed project I still have a Quality Street tub labelled " assorted"