Ronnie project 2007/1

Ronald_McBurger · 09 February 2007, 12:02:53

OK. We are off and running. 9 days after my back operation and I have acquired project number 1 for this year.

I am keeping Mum about the details until I collect it for obvious reasons. Let's just say, this could be the fastest profit ever on an omega. As far as I can guess, it needs one part (which I have) and about 30 minutes to fix. [smiley=vrolijk_26.gif]

There will be some more very jealous people on here when they see what I got. I say MORE because Laidback already knows the details. When I told him how much he swore many, many times. Which, confirms that I got a really good deal. [smiley=thumbsup.gif]
So..... watch this space.

Ronnie is BACK!

[smiley=tekst-toppie.gif]

bob.dent · 09 February 2007, 12:19:48

Fin you old rogue, you always had an eye for a bargain!!

Look forward to hearing more about it.

Timbuk · 09 February 2007, 12:52:50

Hmmmm.... 30 mins, thats a long time for you to be under a bonnet Fin, could be anything

TheBoy · 09 February 2007, 12:56:25

Not a coolant leak one is it?

Markie · 09 February 2007, 13:08:23

dispack... :-/

Marks DTM Calib · 09 February 2007, 13:21:48

Not that Cdx with the autobox main loom fault/ecu fault that keeps blowing fuses (and no its not the selector switch), the one that requires a complete autobox re-wire, autobox, Auto ecu, wishbones, camcover gaskets, rear shocks, wash, vac, polish, climate bulbs, front tyres.....etc....

Admin · 09 February 2007, 13:25:09

QuoteNot that Cdx with the autobox main loom fault/ecu fault that keeps blowing fuses (and no its not the selector switch), the one that requires a complete autobox re-wire, autobox, Auto ecu, wishbones, camcover gaskets, rear shocks, wash, vac, polish, climate bulbs, front tyres.....etc....

Yep that's the one with the blowing exhaust manifold gasket and a funny noise coming from the front of the engine...

Ronald_McBurger · 09 February 2007, 15:38:26

Yada yada. We'll see when we see. I suspect the fault is one I can handle. Will make a good profit regardless of certain members negativity! No names mentioned - Mark...ooops

Marks DTM Calib · 09 February 2007, 15:40:54

QuoteYada yada. We'll see when we see. I suspect the fault is one I can handle. Will make a good profit regardless of certain members negativity! No names mentioned - Mark...ooops

tunnie · 09 February 2007, 15:46:34

Good luck on the project, I don't have time for any more at the moment...

JamesV6CDX · 09 February 2007, 15:47:41

Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures!!

Ronald_McBurger · 09 February 2007, 16:17:36

Sorry, what was it you wanted James?

Markie · 09 February 2007, 17:57:35

QuoteDetails, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures, Details, pictures!!

stuff that - profit margin is all that matters

Tony H · 09 February 2007, 19:07:38

Glad to see your back into spanner twirling mode Fin

jonny2112 · 09 February 2007, 19:34:55

Here we go again .......................YIPPEE

News:

Ronnie project 2007/1

Ronald_McBurger

Ronald_McBurger

Ronald_McBurger