Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: PCI card...IDE/SATA  (Read 1920 times)

0 Members and 1 Guest are viewing this topic.

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5725
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
PCI card...IDE/SATA
« on: 01 February 2011, 21:40:23 »
Hi all....

I have just purchased a PCI card to enable me to add extra drives.....can anyone tell me whether the new drive should be set as master or slave. The other drives (IDE) installed on the MB are set on each ribbon as one master, one slave (DVD RW is slave on one ribbon). :y
I think the card IDE Drive should probably be set to master, but advice would be appreciated. The card can also have three SATA drives installed. If I add further SATA drives, would the IDE drive then have to be set to master or slave.. :o :o :o :o :o :o
Hope this is clear....my mind is boggled ;D ;D ;D ;D ;D ;D

Reason for loads of additional drives is that C drive is kept just for windows, so if I get virused, etc, I can wipe C drive and reload in about an hour and do not lose anything. :y
« Last Edit: 01 February 2011, 21:41:47 by terbert1 »
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

cem_devecioglu

  • Guest
Re: PCI card...IDE/SATA
« Reply #1 on: 01 February 2011, 21:45:45 »
if its single no setting required (on the cable).. but check the bios for irq sharing of the pci slot.. if it shares move to another slot etc..

ps: those pci cards are not that fast, and will slow down if you use multiple discs..
« Last Edit: 01 February 2011, 21:50:42 by cem_devecioglu »
Logged

Broomies Mate

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol, UK
  • Posts: 3840
    • Stuff!
    • View Profile
Re: PCI card...IDE/SATA
« Reply #2 on: 01 February 2011, 22:02:14 »
The IDE and SATA controllers will be completely separate, even if they are on the same card, so the setting on the IDE drive shouldn't matter if using a combination of IDE and SATA drives.

Just makes sure you have plenty of cooling as Hard Disks can output plenty of heat.  Also ensure your PSU is up to scratch!  :y
Logged
2004 Saab 9-5 Aero Merlot Red Stg1 noobtune
2009 Saab 9-5 Turbo Edition Titan Grey Stg3 noobtune
2017 Vauxhall Vivaro L1H1 125PS Star Silver

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5725
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: PCI card...IDE/SATA
« Reply #3 on: 01 February 2011, 22:32:28 »
Thanks for quick responses, fellas. :y

Yes..psu is 700 watt, dual core 6000 cpu, 4 gb ram loaded but xp only recognises 3.25. 9400GT card.
Got plenty of fans, tower weighs a ton ;D ;D ;D
The new drive is for Rfactor racing only. Other drives are Flight Sim (various versions) and they ping along at a fair lick. For those that are in the 'know', my FSX fps average about 50, occasionally going up to over a 100 if in a bleak area.
Thanks for advice :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

Broomies Mate

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol, UK
  • Posts: 3840
    • Stuff!
    • View Profile
Re: PCI card...IDE/SATA
« Reply #4 on: 01 February 2011, 22:33:46 »
Quote
Thanks for quick responses, fellas. :y

Yes..psu is 700 watt, dual core 6000 cpu, 4 gb ram loaded but xp only recognises 3.25. 9400GT card.
Got plenty of fans, tower weighs a ton ;D ;D ;D
The new drive is for Rfactor racing only. Other drives are Flight Sim (various versions) and they ping along at a fair lick. For those that are in the 'know', my FSX fps average about 50, occasionally going up to over a 100 if in a bleak area.
Thanks for advice :y

That'll be the 9400GT  :y
Logged
2004 Saab 9-5 Aero Merlot Red Stg1 noobtune
2009 Saab 9-5 Turbo Edition Titan Grey Stg3 noobtune
2017 Vauxhall Vivaro L1H1 125PS Star Silver

cem_devecioglu

  • Guest
Re: PCI card...IDE/SATA
« Reply #5 on: 01 February 2011, 22:35:32 »
8500 or something similiar is rusting aside.. its been long time I give up gaming.. :-/
Logged

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5725
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: PCI card...IDE/SATA
« Reply #6 on: 01 February 2011, 23:17:08 »
Cem....in our house, gaming is better than Eastenders, Corrie, Holby city, etc, etc, ;D ;D ;D ;D ;D
Just bought swmbo a set of cordless headphones so I don't have to listen while I am flying (Flight Sim) :y
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

Chris_H

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • E London/Essex UK
  • Posts: 1716
    • Jag XF Portfolio S 3.0D
    • View Profile
Re: PCI card...IDE/SATA
« Reply #7 on: 02 February 2011, 07:59:56 »
Quote
8500 or something similiar is rusting aside.. its been long time I give up gaming.. :-/
You have your life back Cem! :y

Whatever you do don't fall for watching soaps on tv. ;D ;D ;D
Logged
First Vauxhall - PABX Cresta; Previous, previous Vauxhall - 3.0 12v Senator CD; Previous Vauxhall Omega Elite 3.0V6 Saloon Auto

cem_devecioglu

  • Guest
Re: PCI card...IDE/SATA
« Reply #8 on: 02 February 2011, 09:49:51 »
soaps , mostly I watch with one eye  ;D, as I'm reading oof usually .. (or rarely facebook)

but other than that 8 small monsters jumping everywhere and sometimes on me, give me enough trouble ;D
« Last Edit: 02 February 2011, 09:50:14 by cem_devecioglu »
Logged

mathewst

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Split, Croatia
  • Posts: 1681
    • v40
    • View Profile
Re: PCI card...IDE/SATA
« Reply #9 on: 02 February 2011, 09:57:53 »
If  you want to  use all 4 gigs of RAM put XP 64bit version.
I'm guessing your current video card has 768MB of memory.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107048
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: PCI card...IDE/SATA
« Reply #10 on: 02 February 2011, 18:14:34 »
Quote
If  you want to  use all 4 gigs of RAM put XP 64bit version.
I'm guessing your current video card has 768MB of memory.
4Gb is a horrid amount. 32bit can only use a shade over 3Gb, and the inefficiencies of 64bit Windows makes 4G not worthwhile (over 3G 32bit).

If you wan't to go 64bit, XP really isn't the way anyway, due to immature architecture and poor driver support. Vista or later is a much better bet for 64bit :y
Logged
Grumpy old man

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5725
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: PCI card...IDE/SATA
« Reply #11 on: 02 February 2011, 18:50:23 »
Quote
If  you want to  use all 4 gigs of RAM put XP 64bit version.
I'm guessing your current video card has 768MB of memory.

Graphics card is 1024mb memory. ;)

You are right, TB....I have got my spare comp back now so will load windows 7 in and see what thats all about. Then I'll see about loading it on here. :y
I then have the capacity to put in more ram....I think this MB will suport either 8 or 16 gig.

One tech point....if I put Windows 7 on this comp, can I just put in the disk and it automatically updates....or is it a wipe and format and raw load :)
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107048
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: PCI card...IDE/SATA
« Reply #12 on: 02 February 2011, 19:25:56 »
Quote
Quote
If  you want to  use all 4 gigs of RAM put XP 64bit version.
I'm guessing your current video card has 768MB of memory.

Graphics card is 1024mb memory. ;)

You are right, TB....I have got my spare comp back now so will load windows 7 in and see what thats all about. Then I'll see about loading it on here. :y
I then have the capacity to put in more ram....I think this MB will suport either 8 or 16 gig.

One tech point....if I put Windows 7 on this comp, can I just put in the disk and it automatically updates....or is it a wipe and format and raw load :)
Win7 does have a upgrade options (though its quite fussy), but I would 100% fully recommend rebuild from scratch. Sorry.
Logged
Grumpy old man

cem_devecioglu

  • Guest
Re: PCI card...IDE/SATA
« Reply #13 on: 02 February 2011, 19:34:40 »
Quote
Quote
Quote
If  you want to  use all 4 gigs of RAM put XP 64bit version.
I'm guessing your current video card has 768MB of memory.

Graphics card is 1024mb memory. ;)

You are right, TB....I have got my spare comp back now so will load windows 7 in and see what thats all about. Then I'll see about loading it on here. :y
I then have the capacity to put in more ram....I think this MB will suport either 8 or 16 gig.

One tech point....if I put Windows 7 on this comp, can I just put in the disk and it automatically updates....or is it a wipe and format and raw load :)
Win7 does have a upgrade options (though its quite fussy), but I would 100% fully recommend rebuild from scratch. Sorry.

agreed..
Logged

Terbs

  • Omega Lord
  • *****
  • Offline Offline
  • Brackley/Wareham
  • Posts: 5725
  • The Freezer Geezer
    • CD Saloon 2003
    • View Profile
Re: PCI card...IDE/SATA
« Reply #14 on: 02 February 2011, 19:57:48 »
Quote
Quote
Quote
Quote
If  you want to  use all 4 gigs of RAM put XP 64bit version.
I'm guessing your current video card has 768MB of memory.

Graphics card is 1024mb memory. ;)

You are right, TB....I have got my spare comp back now so will load windows 7 in and see what thats all about. Then I'll see about loading it on here. :y
I then have the capacity to put in more ram....I think this MB will suport either 8 or 16 gig.

One tech point....if I put Windows 7 on this comp, can I just put in the disk and it automatically updates....or is it a wipe and format and raw load :)
Win7 does have a upgrade options (though its quite fussy), but I would 100% fully recommend rebuild from scratch. Sorry.

agreed..

Thanks chaps :y  Its not a major problem as I only use C drive for the very basics....most of my stuff is on other drives. Makes it easy to wipe if I get corruptions or viruses. :y does not take long to sort out any programmes that may need a 'backward tweak' ;)
Logged
Wrong Switch Tony......flicking the wrong bit for 50 years
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.