Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunnie]

As requested, some extra pictures of mounting locations for injectors, vaporiser 

Injector Mounting Bracket on Cam Cover, i should actually replace back bracket its too short.



Its simply been cut to length and had injectors bolted on.



LPG Filter, its important to mount this for easy access as they are a service item, they are stamped at every 10k, but thats due to dirty Europe fuel, i shall be replacing mine every year (30-40k)



 LPG Vapour temp sensor



Vaporiser mounted to drivers side wing



Pipe from heater matrix into Vaporiser, if you can see that white plastic, thats a straight through joiner so goes from Heater matrix into vaporiser



Vaporiser from above



Bolt to secure vaporisor

[Lazydocker]

Not coolant temp sensor, LPG Vapour temp sensor

Coolant temp sensor is screwed into/attached to Vaporiser

[tunnie]

Not coolant temp sensor, LPG Vapour temp sensor

Coolant temp sensor is screwed into/attached to Vaporiser

D'oh, sorry, i'll change that 

[PhilRich]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

[tunnie]

no problemo 

[Lazydocker]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

Thought you had a V6 for some reason

I'll try and do the How 2 for a 4 pot in the next couple of days

[PhilRich]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

Thought you had a V6 for some reason

I'll try and do the How 2 for a 4 pot in the next couple of days

Thanks Paul, I am looking forward to seeing it!
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie 

[tunnie]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

Thought you had a V6 for some reason

I'll try and do the How 2 for a 4 pot in the next couple of days

Thanks Paul, I am looking forward to seeing it!
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie 

4pots make light work of towing dead V6's     

[Lazydocker]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

Thought you had a V6 for some reason

I'll try and do the How 2 for a 4 pot in the next couple of days

Thanks Paul, I am looking forward to seeing it!
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie 

Sorry for the delay Phil... Too much stuff going on at the moment!

I'm starting it now (which is how I stumbled upon this thread ) so should be up in a couple of days

[PhilRich]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

Thought you had a V6 for some reason

I'll try and do the How 2 for a 4 pot in the next couple of days

Thanks Paul, I am looking forward to seeing it!
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie 

Sorry for the delay Phil... Too much stuff going on at the moment!

I'm starting it now (which is how I stumbled upon this thread ) so should be up in a couple of days

Please, no apologies necessary Paul 
I'm pleased you have found the time to do it at all mate, and very grateful to you for your previous help, which together with Tunnie,  Kevin Wood & new member Ernie, means i'm now pretty much clued up on the way to go 

[Lazydocker]

Thanks Tunnie, those pics are brilliant!   David Bailey eat your heart out!!!
Seriously though, thanks a lot tunnie mate 

Thought you had a V6 for some reason

I'll try and do the How 2 for a 4 pot in the next couple of days

Thanks Paul, I am looking forward to seeing it!
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie 

Sorry for the delay Phil... Too much stuff going on at the moment!

I'm starting it now (which is how I stumbled upon this thread ) so should be up in a couple of days

Please, no apologies necessary Paul 
I'm pleased you have found the time to do it at all mate, and very grateful to you for your previous help, which together with Tunnie,  Kevin Wood & new member Ernie, means i'm now pretty much clued up on the way to go 

It's in the Test Area at the moment... I'm just reading through it a couple of times and I'll PM Jimbob to get it moved