Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Door bump strip  (Read 882 times)

0 Members and 1 Guest are viewing this topic.

Dazzler

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Haverhill, Suffolk
  • Posts: 4198
  • Drive it like you stole it......
    • View Profile
Door bump strip
« on: 22 July 2007, 18:43:49 »

Is the rear door bump strips on a mini-facelft Omega bolted on, on clips or stuck on?????
Logged
Big jobbies now finished.....Now running on LPG

Lordmpl

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Norwich, Norfolk, UK
  • Posts: 269
  • 2.5 V6 Auto CDX - Big Bertha
    • View Profile
Re: Door bump strip
« Reply #1 on: 23 July 2007, 08:49:50 »

Its, Double sised tape, and plastic clips, they are sods to get off, as they bend.

 :y
Logged
I Love my Omega, wanted it for so long, now it's in my grasp, it's not getting away!!

RonaldMcBurger

  • Guest
Re: Door bump strip
« Reply #2 on: 23 July 2007, 09:50:27 »

New ones are about £13. Used ones are inevitably bent and also will have residue of old tape on. If fitting a new one, take the time to remove every last trace of the old strip and gum from the tape. New clips simply slide onto the new strip, then peel of backing tape, line up and press home. Run along the whole length of the strip each way to ensure a good seal.

WARNING. Alignment is essential. There is a degree of adjustment laterally, so if you just go for it youy may find the strip too far forwards. This will snag on the front door when opening and peel the strip away, then its back to square one. The seal at the front of the strip is the most critical. Make sure this is a good tight fit otherwise it will get caught again.
Logged

Dazzler

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Haverhill, Suffolk
  • Posts: 4198
  • Drive it like you stole it......
    • View Profile
Re: Door bump strip
« Reply #3 on: 23 July 2007, 13:39:39 »

Cheers Ronnie, looks like i will have to get a new one then ;)
Logged
Big jobbies now finished.....Now running on LPG
Pages: [1]   Go Up
 

Page created in 0.008 seconds with 16 queries.