Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[megaomega123]

Looking for a n/s (passenger) headlight unit complete. Facelift (2000) Xenon HID D2S bulbs with ballast pack. Must be good condition.
Immediate payment for the right one.
Many thanks

[I_want_an_Omega]

Is the car a Facelift or Mini-Facelift one. I've got one if it's a Mini-Facelift you want.

[megaomega123]

Is the car a Facelift or Mini-Facelift one. I've got one if it's a Mini-Facelift you want.

Facelift sorry I will edit OP 

[tunnie]

i've got one here, but the adjuster is broken

[megaomega123]

i've got one here, but the adjuster is broken

Is the intact adjuster from my existing unit easily transferable to replace the broken one?

[RobG]

Yep, Light out, remove bulbs & covers, ballast & motor. Stick in the oven @ about 100deg for 5 minutes or so.....split lens from body.....swap out adjuster

[Lazydocker]

Yep, Light out, remove bulbs & covers, ballast & motor. Stick in the oven @ about 100deg for 5 minutes or so.....split lens from body.....swap out adjuster

But if you're going to do all that you may as well fit the aluminium ones

[megaomega123]

Yep, Light out, remove bulbs & covers, ballast & motor. Stick in the oven @ about 100deg for 5 minutes or so.....split lens from body.....swap out adjuster

Similar to lazytinker I am a lazy tinker so will look for one with adjuster intact.
Sorry tunnie and thanks.

[Elite Pete]

Yep, Light out, remove bulbs & covers, ballast & motor. Stick in the oven @ about 100deg for 5 minutes or so.....split lens from body.....swap out adjuster

Similar to lazytinker I am a lazy tinker so will look for one with adjuster intact.
Sorry tunnie and thanks.

If its intact before its posted by the time the postie has handled it it will be broken

[unlucky alf]

i`ll check on the pair ive got in my garage, i know one had a busted adjuster but cant remember which side,  :-/, i`ll get back to you shortlyish!. ....just had a look at it, all seems o,k apart from the bottom mounting bracket hole is split but all there, would imagine itll bolt up with no problem, & the lense could do with a little polish if you want it sparkly, anyhow let me know.

[megaomega123]

i`ll check on the pair ive got in my garage, i know one had a busted adjuster but cant remember which side,  :-/, i`ll get back to you shortlyish!. ....just had a look at it, all seems o,k apart from the bottom mounting bracket hole is split but all there, would imagine itll bolt up with no problem, & the lense could do with a little polish if you want it sparkly, anyhow let me know.

Thanks alf but I will hold out for perfect condition. Am being picky because I got a 2nd hand calliper which turned out to be worse than my original, so lesson learnt.
Thanks all the same

[RobG]

i`ll check on the pair ive got in my garage, i know one had a busted adjuster but cant remember which side,  :-/, i`ll get back to you shortlyish!. ....just had a look at it, all seems o,k apart from the bottom mounting bracket hole is split but all there, would imagine itll bolt up with no problem, & the lense could do with a little polish if you want it sparkly, anyhow let me know.

Thanks alf but I will hold out for perfect condition. Am being picky because I got a 2nd hand calliper which turned out to be worse than my original, so lesson learnt.
Thanks all the same

Might be better buying new.

[megaomega123]

i`ll check on the pair ive got in my garage, i know one had a busted adjuster but cant remember which side,  :-/, i`ll get back to you shortlyish!. ....just had a look at it, all seems o,k apart from the bottom mounting bracket hole is split but all there, would imagine itll bolt up with no problem, & the lense could do with a little polish if you want it sparkly, anyhow let me know.

Thanks alf but I will hold out for perfect condition. Am being picky because I got a 2nd hand calliper which turned out to be worse than my original, so lesson learnt.
Thanks all the same

Might be better buying new.

Think I will head down that route. I seem to be treating the car at the moment so why not. Still, if anybody has one I will consider depending on condition.

[RobG]

Got a pair in the shed complete with ally adjusters will bide my time `till I decide whether to sell or retrofit on mine