Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: I failed at the scrap yard for these....  (Read 1618 times)

0 Members and 1 Guest are viewing this topic.

Psychoca

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Female
  • Norfolk
  • Posts: 776
    • Beaten up Mondeo TDCI ST.
    • View Profile
I failed at the scrap yard for these....
« on: 31 May 2011, 15:44:45 »
I tried to get the following from 3 different scrap yards in Peterborough...  The 1st I went to only had about 10 cars, (only 1 Vauxhall, 1 Audi, 1 Citreon, 1 Fiat, NO Ford's) and a shedload of cars that looked as though they were going to repair!!!  The next I went to was in the process of closing down and only had 3 cars..  The final one I went to, had a good number of cars, but, They don't let people have just nuts and bolts (I seriously have never heard anything like it with a scrap yard!!!)... So....

I need a starter motor bolt, E16 head and 65mm thread length and 2 inlet manifold nuts (I dropped them putting them back on and lost the in the dark side of the engine... :s
Logged

Varche

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • middle of Andalucia
  • Posts: 13998
  • What is going to break next?
    • Golf Estate
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #1 on: 31 May 2011, 17:41:57 »
They probably saw the size of your poachers pockets!

I had a similar experience at a Spanish Scrapyard. Just a counter in an airconditioned room. What do you want? No haven't got it. A chnage from the last time I was at a scrapyard and got locked in for the night whilst removing a rear spring off a Wolsey 16/60  ;D

Are these bolts you are after the same ona 2.5 petrol?
Logged
The biggest joke on mankind is that computers have started asking humans to prove that they aren’t a robot.

Psychoca

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Female
  • Norfolk
  • Posts: 776
    • Beaten up Mondeo TDCI ST.
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #2 on: 31 May 2011, 18:39:28 »
I would have thought that the Starter Motor ones would be, not sure about the intake manifold nuts (I just know they need a 12mm socket... lol...)  Thanks...
Logged

Hannah Judes Dad

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Cleethorpes North East Lincs
  • Posts: 1933
    • the misses round the bend
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #3 on: 03 June 2011, 18:13:57 »
Quote
I tried to get the following from 3 different scrap yards in Peterborough...  The 1st I went to only had about 10 cars, (only 1 Vauxhall, 1 Audi, 1 Citreon, 1 Fiat, NO Ford's) and a shedload of cars that looked as though they were going to repair!!!  The next I went to was in the process of closing down and only had 3 cars..  The final one I went to, had a good number of cars, but, They don't let people have just nuts and bolts (I seriously have never heard anything like it with a scrap yard!!!)... So....

I need a starter motor bolt, E16 head and 65mm thread length and 2 inlet manifold nuts (I dropped them putting them back on and lost the in the dark side of the engine... :s

I've got a spare bolt from my donor car with an E16 head, the threaded part is 65mm but the total length of the bolt is approx 125mm excluding the head so don't know if that is any good for you
Logged
Don't wee on the electric fence

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107026
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #4 on: 04 June 2011, 10:00:05 »
Let me check in my garage, I may have a TD starter motor (did have, cant remember if I still have it)
Logged
Grumpy old man

Seth

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • South Wales Valleys
  • Posts: 6646
  • If there's a 'system' - play it ... !
    • '99 2.5TD GLS Estate
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #5 on: 04 June 2011, 10:18:07 »
Quote
Let me check in my garage, I may have a TD starter motor (did have, cant remember if I still have it)
Probably 'cos you part-ex'd it with moi for half a gallon of Stella at Newent!
 ;D ;D ;D
Logged
Gettin' seriously hacked-off by those who ignore the wisdom of proven experience ... and Forum guidelines.

Seth

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • South Wales Valleys
  • Posts: 6646
  • If there's a 'system' - play it ... !
    • '99 2.5TD GLS Estate
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #6 on: 04 June 2011, 10:27:11 »
You should be able to source these nuts and the bolt from a local engineering hardware outlet ........

From memory:
The bolt is an M10 thread and may be supplied with a 17mm head
Nuts are M8 "flanged" and could be satisfactorily substituted with "standard" M8 nuts with the addition of flat/spring washers under each one.

Done this meself a while back! :y 
Logged
Gettin' seriously hacked-off by those who ignore the wisdom of proven experience ... and Forum guidelines.

Psychoca

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Female
  • Norfolk
  • Posts: 776
    • Beaten up Mondeo TDCI ST.
    • View Profile
Re: I failed at the scrap yard for these....
« Reply #7 on: 13 June 2011, 22:51:07 »
Apologies for delays getting back to this post, I have had other things on my mind... :-/

@Sethsmate, sounds a good idea, to push the bolt head away from the gearbox...  Will try that if necessary...

@Hannah Jules Dad, Thanks, but, I am guessing that there is a reasonable length of unthreaded bolt before the head, (although if I can get hold of a die I could always extend the thread)...

Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 16 queries.