Topic: How do you find out ? ? (Read 8208 times)

ANDY8 · « **Reply #15 on:** 13 July 2006, 22:28:42 »

well i found out why the aircon had stopped working, I must have gone over some rough terrain and pulled the plug completely off the compressor from underneath ,

A few solders later and its all back working again, Just in time for the weekend heatwave

markey mark · « **Reply #16 on:** 13 July 2006, 22:34:08 »

good result andy8 and free as well !! one job to do on mine is get the aircon system running

ANDY8 · « **Reply #17 on:** 13 July 2006, 23:13:44 »

I think its more trouble than its worth sometimes,,, But hey if its there you just got to have it working right [smiley=2vrolijk_08.gif]

Stress, No1 killer

Matchless · « **Reply #18 on:** 14 July 2006, 09:33:54 »

Nixoro,

That sounds like a low pressure problem, cant hear it from here so hard to be sure [smiley=cheesy.gif]

Watch the compressor clutch plate carefully, if the pressure switch is cutting in and out you should see the compressor speed varying as the clutch engages or releases. You may even be able to see the clutch plate move slightly as it releases from the pulley then clamps to it again.

nixoro · « **Reply #19 on:** 14 July 2006, 09:38:11 »

Quote

Nixoro,

That sounds like a low pressure problem, cant hear it from here so hard to be sure [smiley=cheesy.gif]

Watch the compressor clutch plate carefully, if the pressure switch is cutting in and out you should see the compressor speed varying as the clutch engages or releases. You may even be able to see the clutch plate move slightly as it releases from the pulley then clamps to it again.

Shall have a look at the weekend, if its doing this am I right in thinking it just needs a regas.

News:

Author Topic: How do you find out ? ? (Read 8208 times)

ANDY8

Re: How do you find out ? ?

markey mark

Re: How do you find out ? ?

ANDY8

Re: How do you find out ? ?

Matchless

Re: How do you find out ? ?

nixoro

Re: How do you find out ? ?