Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1] 2 3 4 5  All   Go Down

Author Topic: Sorry, but the scuttle guide is useless.  (Read 12892 times)

0 Members and 2 Guests are viewing this topic.

theolodian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 3654
  • I need a new avatar.
    • View Profile
Sorry, but the scuttle guide is useless.
« on: 20 November 2006, 18:11:25 »
I spent 45 mins trying to get it off today.  Got the wipers off, but that's it.  Could not get the screw out of the o/s strut tower.  Is it T25 or T28?  Stripped out my T20 after backing it out 2 turns and getting stuck on the rust.  I want to go buy the right bit, so please tell me what to get.

Main thing though, what is the deal with the plastic screws at the base of the windscreen?  I could not get them to release.  If I had had the right crank sensor from VX I would have snipped them off with the dykes.  I'd prefer not to, so any suggestions?

Anything else I need to know once I get past those 2 issues?  Otherwise the scuttle is getting torn out in shreds so that I can get the car back here.  Then I'll have to get one from a breaker.

Thanks in advance!
Logged
Trains may have been invented here, but public transport is a foreign concept!

Bo Bo

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Coventry
  • Posts: 4812
  • Here's another nice mess you've gotten me into!
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #1 on: 20 November 2006, 18:44:19 »
Not a good day then!  :-?
Logged
Where would we be without rhetorical questions?!

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39789
    • ML350 TDM SmartRoadster
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #2 on: 20 November 2006, 18:46:15 »
We could all compare your version of how it should be written then with NIXORO's & we'll take a vote on it!  ::)
I've just read NIXORO's version and compared to my experience of removing the scuttle (pre forum) I can't fault it.
Logged

theolodian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 3654
  • I need a new avatar.
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #3 on: 20 November 2006, 18:56:00 »
Quote
We could all compare your version of how it should be written then with NIXORO's & we'll take a vote on it!  ::)
I've just read NIXORO's version and compared to my experience of removing the scuttle (pre forum) I can't fault it.
It is fine, in that it covers what is obvious after you open the hood.  It does go a bit further in mentioning the screws at the base of the windscreen, but not what to do with them.  It also doesn't say what tools you need.

Long story short, I'm not mechanically inept, but with those instructions I could not remove the scuttle while being confident that I would not break it or the windscreen.
Logged
Trains may have been invented here, but public transport is a foreign concept!

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39789
    • ML350 TDM SmartRoadster
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #4 on: 20 November 2006, 19:07:11 »
Quote
.......
It is fine, in that it covers what is obvious after you open the hood.   .......
Perhaps it's your US spec car then!  :-? Your car have a trunk too??
My car has a bonnet.  ;)
Too many USA sit-coms/films. My 18yr old son's friend was talking about bloody flashlights  :o when the power went off locally last week-end and my 11 yr old niece (another USA sit-com/kids TV addict) talks about bloody diapers! >:(
Logged

theolodian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 3654
  • I need a new avatar.
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #5 on: 20 November 2006, 19:09:18 »
Quote
Quote
.......
It is fine, in that it covers what is obvious after you open the hood.   .......
Perhaps it's your US spec car then!  :-? Your car have a trunk too??
My car has a bonnet.  ;)
Too many USA sit-coms/films. My 18yr old son's friend was talking about bloody flashlights  :o when the power went off locally last week-end and my 11 yr old niece (another USA sit-com/kids TV addict) talks about bloody diapers! >:(
Yep it does!  :D

Actually, I started to write bonnet, but wasn't sure if it had 1 or 2 t's  :-/ ;D
Logged
Trains may have been invented here, but public transport is a foreign concept!

Eliteman Steve

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Brighton
  • Posts: 125
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #6 on: 20 November 2006, 19:11:55 »
Quote
Quote
.......
It is fine, in that it covers what is obvious after you open the hood.   .......
Perhaps it's your US spec car then!  :-? Your car have a trunk too??
My car has a bonnet.  ;)
Too many USA sit-coms/films. My 18yr old son's friend was talking about bloody flashlights  :o when the power went off locally last week-end and my 11 yr old niece (another USA sit-com/kids TV addict) talks about bloody diapers! >:(

Hey Andy your car has a boot mate :y Bonnet covers the engine , which they call a hood ;)
Logged

Eliteman Steve

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Brighton
  • Posts: 125
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #7 on: 20 November 2006, 19:17:18 »
Quote
I spent 45 mins trying to get it off today.  Got the wipers off, but that's it.  Could not get the screw out of the o/s strut tower.  Is it T25 or T28?  Stripped out my T20 after backing it out 2 turns and getting stuck on the rust.  I want to go buy the right bit, so please tell me what to get.

Main thing though, what is the deal with the plastic screws at the base of the windscreen?  I could not get them to release.  If I had had the right crank sensor from VX I would have snipped them off with the dykes.  I'd prefer not to, so any suggestions?

Anything else I need to know once I get past those 2 issues?  Otherwise the scuttle is getting torn out in shreds so that I can get the car back here.  Then I'll have to get one from a breaker.

Thanks in advance!

Don't know about the strut tower , but the plastic screws just need to be turned through 45 degrees (its more of a clip than a screw) then if you have already removed the sealing strip the scuttle cover lifts up from the leading edge . :y
Logged

theolodian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 3654
  • I need a new avatar.
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #8 on: 20 November 2006, 19:20:26 »
Quote
Quote
I spent 45 mins trying to get it off today.  Got the wipers off, but that's it.  Could not get the screw out of the o/s strut tower.  Is it T25 or T28?  Stripped out my T20 after backing it out 2 turns and getting stuck on the rust.  I want to go buy the right bit, so please tell me what to get.

Main thing though, what is the deal with the plastic screws at the base of the windscreen?  I could not get them to release.  If I had had the right crank sensor from VX I would have snipped them off with the dykes.  I'd prefer not to, so any suggestions?

Anything else I need to know once I get past those 2 issues?  Otherwise the scuttle is getting torn out in shreds so that I can get the car back here.  Then I'll have to get one from a breaker.

Thanks in advance!

Don't know about the strut tower , but the plastic screws just need to be turned through 45 degrees (its more of a clip than a screw) then if you have already removed the sealing strip the scuttle cover lifts up from the leading edge . :y
Are you saying that when they are all turned 45 degrees, the scuttle detaches by pulling it horizontally towards the front of the car?
Logged
Trains may have been invented here, but public transport is a foreign concept!

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39789
    • ML350 TDM SmartRoadster
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #9 on: 20 November 2006, 19:20:39 »
Quote
..... which they call a hood ;)
THEY being the opperative word! WE call it a bonnet. ;)
Creeping Americanism gets up my nose ... incase you hadn't already noticed.  ::)
disk, tire, color etc etc are all US but you see them used all the time when people mean disc, tyre & colour.
The original English word for jail cropped up at work in a magazine and nobody had even heard of the word GAOL  :-? ( & no I hadn't mis-spelt goal!  ;D )
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39789
    • ML350 TDM SmartRoadster
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #10 on: 20 November 2006, 19:21:58 »
Quote
....
Are you saying that when they are all turned 45 degrees, the scuttle detaches by pulling it horizontally towards the front of the car?
Yes.  :)
Logged

theolodian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 3654
  • I need a new avatar.
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #11 on: 20 November 2006, 19:23:11 »
Quote
Quote
....
Are you saying that when they are all turned 45 degrees, the scuttle detaches by pulling it horizontally towards the front of the car?
Yes.  :)
Ah, now we're getting somewhere!  Cheers!  :y
Logged
Trains may have been invented here, but public transport is a foreign concept!

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39789
    • ML350 TDM SmartRoadster
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #12 on: 20 November 2006, 19:25:53 »
The screw on the off-side strut on mine is a 'push fit' (some heavy handed previous owner) so I can't really help on the proper Torx size.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107073
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #13 on: 20 November 2006, 19:26:12 »
Slight mistake in above info - the plastic clips need to be turned through 90 degrees (so slot is parallel to bas of windscreen), then lift then out. Once all 8 are out (and that torx screw removed, and rubber strip that runs along from of scuttle is removed (sometimes bonnet cable attached to this), the scuttle should wiggle out...
Logged
Grumpy old man

Timbuk

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Telford
  • Posts: 3706
  • owned a Datsun 120y once!
    • View Profile
Re: Sorry, but the scuttle guide is useless.
« Reply #14 on: 20 November 2006, 19:28:09 »
Quote
Quote
Quote
....
Are you saying that when they are all turned 45 degrees, the scuttle detaches by pulling it horizontally towards the front of the car?
Yes.  :)
Ah, now we're getting somewhere!  Cheers!  :y

Thats not strictly true because the right hand end of the long piece of scuttle ( where it joins the short piece ) has to be lifted up over the housing area for the pollen filter. You can't just pull it staight out towards you. Just remember this when you are doing it ;)
Logged
Pages: [1] 2 3 4 5  All   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.