Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1] 2  All   Go Down

Author Topic: Rocker gasket replacement  (Read 3595 times)

0 Members and 2 Guests are viewing this topic.

Kes

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 37
    • View Profile
Rocker gasket replacement
« on: 03 January 2007, 16:29:58 »
Hi all . I have got to replace my rocker gaskets , I have seen top end sets on ebay but their appears to be a lot of gaskets I would'nt use in these sets .

Apart from the rocker gaskets what others would I need to replace with stripping off the plenum etc if I was to source individual gaskets rather than a set .

One more question when disconnecting the battery whats the secret to doing this without the alarm going off .

Also a happy new year to you  all .  :y
Logged

mar892ree

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Northampton
  • Posts: 244
  • if it dont undo, hit it wiv an hammer
    • View Profile
Re: Rocker gasket replacement
« Reply #1 on: 03 January 2007, 16:52:44 »
Rule No 1 ! ------------- DONT use crap EBay gasket sets, especially for rockers !
Logged

Taxi_Driver

  • Guest
Re: Rocker gasket replacement
« Reply #2 on: 03 January 2007, 16:54:48 »
Hi

As you say 'gaskets' i assume you have a V6?

Its probably more difficult on a V6.......but i would think same principle as a 2.2.

I would buy the rocker cover gaskets from Vx......not that expensive......you will need O rings for the cover bolts and a tube of black gasket sealing compound.

I havent looked.....but have you checked out the maintenance section to see if theres a 'how to' for it.

As for battery.......turn ign on and then off........then youve got 15secs to disconnect the battery to stop the the siren going off  :y
Logged

x25xe

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Hayes, Middlesex
  • Posts: 915
  • Avater removed due to size
    • View Profile
Re: Rocker gasket replacement
« Reply #3 on: 03 January 2007, 17:03:45 »
Quote
Hi

As you say 'gaskets' i assume you have a V6?

Its probably more difficult on a V6.......but i would think same principle as a 2.2.

I would buy the rocker cover gaskets from Vx......not that expensive......you will need O rings for the cover bolts and a tube of black gasket sealing compound.

I havent looked.....but have you checked out the maintenance section to see if theres a 'how to' for it.

As for battery.......turn ign on and then off........then youve got 15secs to disconnect the battery to stop the the siren going off  :y


You could also need the sealing rings on the plenum.  These are the seals between the plenum (which is basically the inlet manifold) and the trumpets (these are the tubes that carry the air to the inlet

Whilst you are doing all this, do not forget to clean the breathers at the same time or the new gaskets will soon go the same way.  And yes, use only genuine gaskets.  Pattern parts do not fit well and soon leak.

Since all this is coming off, I would suggest replacing the Heater Bypass Valve as well.............
Logged
1998 2.5 V6 Omega CDX, Leather and Electric Pack!

x25xe

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Hayes, Middlesex
  • Posts: 915
  • Avater removed due to size
    • View Profile
Re: Rocker gasket replacement
« Reply #4 on: 03 January 2007, 17:07:11 »
Here are the maintenance guides mentioned:

Rocker Gasket Changing

http://www.omegaowners.com/forum/YaBB.pl?num=1152564281

and here is one that deals with the breathers

http://www.omegaowners.com/forum/YaBB.pl?num=1152598350

Hope this helps and good luck


Logged
1998 2.5 V6 Omega CDX, Leather and Electric Pack!

Kes

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 37
    • View Profile
Re: Rocker gasket replacement
« Reply #5 on: 03 January 2007, 17:20:31 »
Thanks for your help lads I will take the advice and stick with vx  :y
Logged

mar892ree

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Northampton
  • Posts: 244
  • if it dont undo, hit it wiv an hammer
    • View Profile
Re: Rocker gasket replacement
« Reply #6 on: 03 January 2007, 17:27:49 »
Good man, VX parts are not that expensive, despite rumours, and the quality is exceptional compared to cheaper brand /  pattern parts !

False economy as they say !

TD mentioned about cleaning breathers out whilst doing top end work, as its NOT UNUSUAL ( as Tom Jones once sang) for these leaks to re appear if breathers etc not done !
Logged

mar892ree

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Northampton
  • Posts: 244
  • if it dont undo, hit it wiv an hammer
    • View Profile
Re: Rocker gasket replacement
« Reply #7 on: 03 January 2007, 17:28:56 »
Where abouts are you Kes, plenty of Trade cards on the site, fingers crossed you live near someone how has an account in order to get bits cheaper for you ! :y
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107445
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Rocker gasket replacement
« Reply #8 on: 03 January 2007, 20:14:56 »
Quote
One more question when disconnecting the battery whats the secret to doing this without the alarm going off .
You have to disconnect battery within 15s of switching off ignition.

So loosen battery terminal clamp. Switch on ign, then switch off. Quickly pull off connection and insulate.
Logged
Grumpy old man

Taxi_Driver

  • Guest
Re: Rocker gasket replacement
« Reply #9 on: 03 January 2007, 20:22:54 »
Quote
Quote
One more question when disconnecting the battery whats the secret to doing this without the alarm going off .
You have to disconnect battery within 15s of switching off ignition.

So loosen battery terminal clamp. Switch on ign, then switch off. Quickly pull off connection and insulate.

I got there nearly 3 hours b4 you TB  ;D......your getting slower  ;D
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107445
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Rocker gasket replacement
« Reply #10 on: 03 January 2007, 21:09:20 »
Quote
Quote
Quote
One more question when disconnecting the battery whats the secret to doing this without the alarm going off .
You have to disconnect battery within 15s of switching off ignition.

So loosen battery terminal clamp. Switch on ign, then switch off. Quickly pull off connection and insulate.

I got there nearly 3 hours b4 you TB  ;D......your getting slower  ;D
did see that part of your post, and i double checked coz was shocked nobody had answered.

Please sack me...
Logged
Grumpy old man

Taxi_Driver

  • Guest
Re: Rocker gasket replacement
« Reply #11 on: 03 January 2007, 21:37:51 »
Quote
Quote
Quote
Quote
One more question when disconnecting the battery whats the secret to doing this without the alarm going off .
You have to disconnect battery within 15s of switching off ignition.

So loosen battery terminal clamp. Switch on ign, then switch off. Quickly pull off connection and insulate.

I got there nearly 3 hours b4 you TB  ;D......your getting slower  ;D
did see that part of your post, and i double checked coz was shocked nobody had answered.

Please sack me...

No we would never do that  :)
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107445
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Rocker gasket replacement
« Reply #12 on: 03 January 2007, 21:42:51 »
Quote
Quote
Please sack me...

No we would never do that  :)
I'm doomed to a life of an OOF Mod....
Logged
Grumpy old man

Taxi_Driver

  • Guest
Re: Rocker gasket replacement
« Reply #13 on: 03 January 2007, 21:47:55 »
Quote
Quote
Quote
Please sack me...

No we would never do that  :)
I'm doomed to a life of an OOF Mod....

Its coz u do such a good job.....plus ur tech2  ;)
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107445
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Rocker gasket replacement
« Reply #14 on: 03 January 2007, 21:50:51 »
Quote
plus ur tech2  ;)
ahh, the truth at last ;)
Logged
Grumpy old man
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.