Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: Oil leak  (Read 5097 times)

0 Members and 1 Guest are viewing this topic.

KEN_B

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • OLDHAM
  • Posts: 17
    • View Profile
Oil leak
« on: 06 July 2007, 08:39:23 »
Have a 1998 2.5 v6 tourer. Only done 84,000
Work done in last few months.
Cambelt, tensioners and water pump.
New discs and pads all round.
Rocker cover gaskets replaced and breather pipes cleaned.
Now have a very bad oil leak, garage saying its the head gasket and that the car is not worth repairing.
no change in performance at all, just using a litre of oil every 50 miles.
Am I being conned or should I scrap it?
Cheers in advance for any help or ideas
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Oil leak
« Reply #1 on: 06 July 2007, 08:54:46 »
Doubtful its HG, more likely the cam cover gaskets gone again. Did you use genuine gaskets last time?
Logged
Grumpy old man

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: Oil leak
« Reply #2 on: 06 July 2007, 08:56:48 »
That sure is some poor diag from the garage......a headgasket leak does not cause major oil loss.....is the oil being burnt or is it dripping out.....if dripping out, where from?

Does it get any better if you drive with the dipstick loose in the tube.

Are the breathers REALY well cleaned out including all the plenum assembly, breather box and pipes etc (sorry, have to rule out the obvious first)
Logged

KEN_B

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • OLDHAM
  • Posts: 17
    • View Profile
Re: Oil leak
« Reply #3 on: 06 July 2007, 09:11:46 »
Hi.
Not being any good with engines I can only take the garages word that they cleaned them.
The oil comes out without any pressure.
From the back of the engine, stand at front of car looking at engine, right hand side.
Pours out even when just ticking over. Was hoping a split pipe but cannot see anything.
Hope this helps
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Oil leak
« Reply #4 on: 06 July 2007, 09:18:21 »
Quote
Hi.
Not being any good with engines I can only take the garages word that they cleaned them.
The oil comes out without any pressure.
From the back of the engine, stand at front of car looking at engine, right hand side.
Pours out even when just ticking over. Was hoping a split pipe but cannot see anything.
Hope this helps
When you say back of engine, do you mean behind it, or on one side but towards the back
Logged
Grumpy old man

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16652
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Oil leak
« Reply #5 on: 06 July 2007, 12:45:27 »
I'm thinking oil cooler to block unions, or maybe unions in the valley

It won't be HG..

Where do you live?
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: Oil leak
« Reply #6 on: 06 July 2007, 13:35:04 »
Me to....
Logged

KEN_B

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • OLDHAM
  • Posts: 17
    • View Profile
Re: Oil leak
« Reply #7 on: 07 July 2007, 07:38:53 »
Hi guys.
I live in Oldham.
The oil appears to be coming from the back of the engine, bulkhead in way can't see anything.
Logged

KEN_B

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • OLDHAM
  • Posts: 17
    • View Profile
Re: Oil leak
« Reply #8 on: 07 July 2007, 15:50:23 »
where is the oil cooler situated .
where are the unions you mentioned.
need to get it back on the road or get rid asap

cheers for all the help so far

ken
Logged

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: Oil leak
« Reply #9 on: 07 July 2007, 21:12:00 »
Quote
where is the oil cooler situated .
where are the unions you mentioned.
need to get it back on the road or get rid asap

cheers for all the help so far

ken




ken[/quote]

The Oil Cooler is situated under the Plenum, and the inlet Manifold... Have a look at this PICTURE the Oil Cooler is under the plate at the bottom of the "V"... there are two oil pipes one towards the front the other towards the back the unions have seals they are between the pipe and oil cooler (if that makes sense)..
You can also see the Coolant Bridge ..

Hope this helps :y
« Last Edit: 07 July 2007, 21:17:55 by Loo-knee »
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

Taxi_Driver

  • Guest
Re: Oil leak
« Reply #10 on: 07 July 2007, 21:35:41 »
How long ago were the cam cover gaskets changed? and did the oil loss start at the same time as the gaskets being changed?

If its what im thinking.....but would only apply if oil leak occured at the same time as gaskets being changed.....i could believe 1ltr of oil would be leaked every 50 miles.
Logged

Smallfry

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 10
    • View Profile
Re: Oil leak
« Reply #11 on: 08 July 2007, 01:06:40 »
Probably not, but what about the oil filter ? Not tight, sealing ring missing/misplaced ?
Logged

KEN_B

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • OLDHAM
  • Posts: 17
    • View Profile
Re: Oil leak
« Reply #12 on: 08 July 2007, 12:05:03 »
had the cam cover gaskets done about 4 months ago, because the plugs on both sides were covered in oil.
seemed to be ok for a while until the oil started pouring out.

the oil filter and sealing ring were changed last week and are ok.

the leak seems to be at the back and towards the top of the engine. going of the info so far the oil cooler or unions seem the next best bet.

is it easy or hard to do these. have a mechanic friend whose willing to look at it for me but has never worked on v6 before
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16652
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Oil leak
« Reply #13 on: 08 July 2007, 12:15:10 »
peice of cake. better access with oil filter off.

Logged

Admin

  • Administrator
  • *****
  • Offline Offline
  • 0
  • Posts: 2595
    • View Profile
Re: Oil leak
« Reply #14 on: 08 July 2007, 12:29:03 »
Oil filter must be removed to release the oil pipes.

I agree with James and Mark. This sounds like a failed union connection.
Not difficult to fix. To be honest if you were planning on keeping the car I would change the oil cooler while you were there. The full kit is around £85 and takes around 3 hours.

If you decide to do it, and your mechainc friend needs some guidance, we can assist.
Logged
The Administrator.
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.013 seconds with 18 queries.