Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Don9247]

Hi everyone I am new o this site and a new omega owner, I had a vectra before and now I wanted an omega, I have a few questions, I Have just got myself an omega, its registered on the logbook as 2.5 but im sure it has an mv6 engine can some one tell me the obvious differences  please, Anyway i think i have a 3.0 v6 24v rear wheel drive manual, not sure if this is common? i have been reading on this forum about people having lsd how do I know if I already have one seeing as this has had an engine change.

Now lastly he engine seems quite sluggish up intill 4500 revs and then it really kicks off is this normall or is there somthimg I can check.

I would really appriecate your help.

[Auto Addict]

Welcome to the forum, if it's a 2.5 it won't be an MV6 I'm afraid.

[psnimv6]

hello i also have a 3.0 mv6 and i bought a chip from ebay ( germany) and it has this effect at 4500 rpm so if you have a 3.0 engine fitted it may have the same chip fitted as for which engine you have i think it is no big difference to the untrained eye but i am sure some omega expert will be along soon to help you check which you have , HTH

[Markjay]

There is no MV6 engine as such, the MV6 had lowered and stiffened sports suspension plus some other minor differences e.g. sports seats, but the engine is identical to a non-MV6 car (e.g. CD, CDX, Elite).

The engine may have been chipped but this is not directly related to it's being MV6 or not.

Also, many MV6 were in use by the police, so could have some other improvements such as potentially higher rev limiter etc by the police force in question, but again these are not standard fitments on MV6 cars.

And as said by AA above, the MV6 was never available with the 2.5L engine, initially only with the 3.0L and later also the 2.6L and 3.2L.

[Markie]

yes 2.6 and 3.2 post 2001. 3.0 only in your age range afraid..

as for sluggish.....whats its history and detail of completed work?

[Don9247]

Ok how do i know what engine i have my dad used to have a vectra v6 2.5 and the engine hhad pleneum chambers my engine doesnt look like it all it sorts of has a big square box ontop where the air intake pipes go.

[Markie]

Ok how do i know what engine i have my dad used to have a vectra v6 2.5 and the engine hhad pleneum chambers my engine doesnt look like it all it sorts of has a big square box ontop where the air intake pipes go.

All the v6 omega engines look the same, and diferent from the veccy, whats mph does it go up to on the spedo?

[TheBoy]

There is no MV6 engine as such, the MV6 had lowered and stiffened sports suspension plus some other minor differences e.g. sports seats, but the engine is identical to a non-MV6 car (e.g. CD, CDX, Elite).

Only the MV6 and Elite had the 3.0l or 3.2l

[TheBoy]

Not easy to tell the 2.5 and 3.0 apart. If its post 1998, the 3.0l will have a longer plenum.

If you post up the MID codes (press and hold S and R together for 3s) I can tell you what that is programmed for, but obviously if the MID or engine has been changed, that could be wrong.

[Don9247]

i think it is 1998 my speedo goes to 160

[Don9247]

codes are

029              2
            24555

cheers guys

[TheBoy]

i think it is 1998 my speedo goes to 160

Does the plenum come forward and droop over cambelt cover at the front, or is the plenum entirely flat on the top?

[TheBoy]

codes are

029              2
            24555

cheers guys

Thats set for a 2.5 manual transmission, 15" wheels, no goodies like HIDs.

[Don9247]

ok my plenum is completly flat ontop
see link for a pic like mine
http://web.ukonline.co.uk/xj40owner/omega/oil/clearspace.JPG
the gagrage i got it from said the replaced the engine

[Don9247]

Thanks for that TheBoy does those codes also represent front wheel drive or rear wheel because mine is a rear wheel drive and the garage i got it from said the replaced the engine gearbox clutch, here is a link for a pic of the engine I have my car, the pic is not actually my car but one with the same engine.

ok my plenum is completly flat ontop

http://web.ukonline.co.uk/xj40owner/omega/oil/clearspace.JPG