Hi Mark,
Head Gasket - Unlikely....there is only a single pressurised oil way through it and thats at the font of teh block, the other oil ways are at less than atmospheric pressure thanks to the engine breathers.
Thats great news!
Drivers Cam Cover - Most likely suspect.....
Will pull the plugs and have a poke around it
Oil Cooler Unions (Looked when stripped down, no evidence of leaking) - At which ones, the ones in the valley?
Yep, the ones that connect to the oil cooler
Oil Cooler Unions to Block (Checked) - As in tried to nip them up?
As in cleaned around the area and checked it all over after idling and a short drive, no visible oil. Bought some crowsfoot sockets just incase
Oil Filter (Checked) - Is it coming from above this?
I changed the oil filter, check around the block to ensure all was perfectly clean with no scratches. Cleaned the area and again, no visible leaks
Oil Filler Neck (Not checked, no evidence on the manifold of burning oil though) - Give it a visual, easy to see from above.
Will take a look, if it was leaking them it would run straight down to the manifold, the top of the manifold is clean
I must be honest and say I have been focusing on oil hitting the manifold only NOT just getting heated and dispersing a smell.
If the drivers cam cover is leaking into the plug holes, would this create the burning oil smell?
Thanks for the help