Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunnie]

Rang up the dealer about ordering a crank sensor, they don't have years listed for the types.

He asked if its the electrical connector is sqaure or rounded....

Any ideas what it would be for a 1998 year V6?

Its for my Elite which is a 1999 Facelift, but it has the older engine with the standard can type oil filters.

I think the engine is 1997/1998

[Markie]

an idea that it will be oval tunnie and part number 90492061

although check it if you can ( 2 min job) in that area you know so well, above dispack  

EDIT just re read - thats what it should be for a 1998 engine, not sure when the change came so i really think you need to check if its 97 engine

[tunnie]

thanks mate, James thought it should be round too...  

Never done a crank sensor before.... it connects on next to this dis?

[IrmscherKris]

Never done a crank sensor before.... it connects on next to this dis?

Yes, thats the one.

Just cut the plug off and pull out. Then re-route it - you'll never get it to go back the same way!


Oh, and make sure you clear the exhaust.  

[Markie]

Never done a crank sensor before.... it connects on next to this dis?

Yes, thats the one.

Just cut the plug off and pull out. Then re-route it - you'll never get it to go back the same way!


Oh, and make sure you clear the exhaust.  

10 minute job 1 torx bolt at oil filter housing at bottom end and 1 electrical connector at top end.

Oh and as usual, remove skuttle and wipers first.

[tunnie]

cheers guys  

[Crazydad]

Yes its round i did mine a few weeks ago

took me all of 5 minutes as i didnt need to remove the skuttle and wipers first.  

i managed to get both my arms around the back of the engine to fit the new plug

[tunnie]

Yes its round i did mine a few weeks ago

took me all of 5 minutes as i didnt need to remove the skuttle and wipers first.  

i managed to get both my arms around the back of the engine to fit the new plug

Should not be a problem for gadget hands here  

Which side of the DIS is it on, passenger?

[Markie]

Yes its round i did mine a few weeks ago

took me all of 5 minutes as i didnt need to remove the skuttle and wipers first.  

i managed to get both my arms around the back of the engine to fit the new plug

Should not be a problem for gadget hands here  

Which side of the DIS is it on, passenger?

behind rear multi ram  

[TheBoy]

Yes its round i did mine a few weeks ago

took me all of 5 minutes as i didnt need to remove the skuttle and wipers first.  

i managed to get both my arms around the back of the engine to fit the new plug

Should not be a problem for gadget hands here  

Which side of the DIS is it on, passenger?

On top of it.  Not far from injector multiplug.