Topic: How am I meant to change leads?? (Read 1162 times)

megaomega123 · « **on:** 27 February 2008, 13:43:19 »

Just begun to change leads but, I can't even see the dis pack. I can get a hand to it but not sure how I am meant to get the new leads on in the right order without being able to see and only just feel.

Got scuttle off but doesn't give much more access.
Am I missing something?

PaulW · « **Reply #1 on:** 27 February 2008, 13:58:00 »

Case of just feeling about...

Order for leads is:

BULKHEAD
5...6
3...4
1...2
RADIATOR

5...3...1
DIS PACK
2...6...4

The DIS pack is mounted horizontally and just to the right of the rear multiram.
BE VERY CAREFUL YOU DO NOT UNPLUG ANY VACUUM PIPES.

megaomega123 · « **Reply #2 on:** 27 February 2008, 14:01:27 »

Thanks.
Looking at the dis pack diagram, mine appears to be vertical. Is this likely or am I feeling wrong lol. If it is vertical then I presume I just rotate your diagram?

mantahatch · « **Reply #3 on:** 27 February 2008, 14:05:46 »

Hi
I wonder, is it possible to just change one lead at a time, that way you should not get them mixed up.

Regards

Mike

megaomega123 · « **Reply #4 on:** 27 February 2008, 14:07:33 »

Thought of that but the leads are sitting in a lead cover, so I cant feel my way from one end to the other directly

Feeling the dis pack, from top to bottom appears to be 2 leads across and 3 leads top to bottom.

Marks DTM Calib · « **Reply #5 on:** 27 February 2008, 14:10:04 »

Early DIS packs are indeed vertical.

Much easier with the plenum out!

megaomega123 · « **Reply #6 on:** 27 February 2008, 14:11:31 »

Unfortunately a lot of my tools are not with me, so plenum out would be a pain right now.
Would I be correct in rotating the dis pack diagram and do a bank at a time?

megaomega123 · « **Reply #7 on:** 27 February 2008, 14:13:49 »

BULKHEAD
5...6
3...4
1...2
RADIATOR

DISPACK
1...4
3...6
5...2

Would this be correct?

Markie · « **Reply #8 on:** 27 February 2008, 16:55:41 »

Quote

Early DIS packs are indeed vertical.

Much easier with the plenum out!

and from my experience scuttle off helps as well

Richard A · « **Reply #9 on:** 27 February 2008, 18:03:06 »

Scuttle off and change one lead at a time, I started with the right-hand bank 2-4-6 (hardest first) also get as much light on the subject as possible, the rest is by feel. Great feeling of satisfaction when it's finished (took about 1 1/2 hours), you will also require at least 2 packets of 'Bandaids'.

regards
richard

News:

Author Topic: How am I meant to change leads?? (Read 1162 times)

megaomega123

How am I meant to change leads??

PaulW

Re: How am I meant to change leads??

megaomega123

Re: How am I meant to change leads??

mantahatch

Re: How am I meant to change leads??

megaomega123

Re: How am I meant to change leads??

Marks DTM Calib

Re: How am I meant to change leads??

megaomega123

Re: How am I meant to change leads??

megaomega123

Re: How am I meant to change leads??

Markie

Re: How am I meant to change leads??

Richard A

Re: How am I meant to change leads??