News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

why does my automatic stall?

Started by minimeee, 09 March 2008, 20:32:41

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

minimeee

at tesco filling station today and there was big cues so put in in park then handbrake on and took foot of brake, eventually its time to go so foot on brake hand brake off into drive and...... stalled.  this happens when i do this, whats gan on guys lol

carlos_fandango


tunnie

give the breathers a good clean...

minimeee

pardon my stupidity but EML???

carlos_fandango

Orange Engine Management light.

tunnie

Quotepardon my stupidity but EML???

Engine Managment Light, light on the dash in the shape of an engine

Debs.

#6
Quoteat tesco filling station today and there was big cues so put in in park then handbrake on and took foot of brake, eventually its time to go so foot on brake hand brake off into drive and...... stalled.  this happens when i do this, whats gan on guys lol

Not sure if the 2.2 has one, but if it does:
Have you cleaned the IAC (Idle valve)...if they get sticky, the valve can`t react quickly enough to the change in load on the engine as you shift from P to D and the engine may stop/falter?

Taxi_Driver

What does it idle at? .......700rpm is normal for a 2.2.

I would try cleaning the throttle body if not done recently....

When did it last have plugs and air filter?

minimeee

think a light of some assortment came on after the stall, should really pay more attention lol, is cleaning the breathers an easy job? could a bingo caller do it?

carlos_fandango


tunnie

Quote
Quoteat tesco filling station today and there was big cues so put in in park then handbrake on and took foot of brake, eventually its time to go so foot on brake hand brake off into drive and...... stalled.  this happens when i do this, whats gan on guys lol

Not sure if the 2.2 has one, but if it does:
Have you cleaned the IAC (Idle valve)...if they get sticky, the valve can`t react quickly enough to the change in load on the engine as you shift from P to D and the engine may stop/falter?

2.2/2.6/3.2 - No Idle Control Valves

The EML light will come on AFTER the stall, thats normal.

Was it on when the engine was running?

minimeee


Taxi_Driver

Quote
Quotepardon my stupidity but EML???

Engine Managment Light, light on the dash in the shape of an engine

Not on a 2.2/2.6/3.2 tunnie......thats the emissions light

EML on above engines is piccy of car with spanner sticking thro its roof  ;)

tunnie

Quote
Quote
Quotepardon my stupidity but EML???

Engine Managment Light, light on the dash in the shape of an engine

Not on a 2.2/2.6/3.2 tunnie......thats the emissions light

EML on above engines is piccy of car with spanner sticking thro its roof  ;)


Ohh yeh  :-[

I was thinking of the 3.0 Estate i had  ::)