Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Noise from cambelt area  (Read 1298 times)

0 Members and 1 Guest are viewing this topic.

ricardo1500

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wolverhampton
  • Posts: 108
    • View Profile
Noise from cambelt area
« on: 04 April 2008, 20:33:12 »

Hi all
2.2 petrol auto with 80000miles.  Cambelt tensioner rollers and water pump changed 8000 miles/16 months ago from autovaux.

Did a 220 mile run last weekend and have since detected a "dry bearing sound from engine front.
  
Removed aux belt but noise still there.  

Removed cambelt cover and pretty sure its its either tensioner, roller or water pump. Which of these is  the usual suspect?  

Its there a check to tell if I'm right....strip and check for play??


Is ther any thing else it could be...I am suprised they could have failed so quickly.
Logged

HGV mechanic

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • northamptonshire
  • Posts: 656
  • he just keeps on going,,,
    • View Profile
Re: Noise from cambelt area
« Reply #1 on: 04 April 2008, 20:36:57 »

tensions, my opinon, best way and safest , take belt off and check ;)

JasonH

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 1079
    • View Profile
Re: Noise from cambelt area
« Reply #2 on: 04 April 2008, 20:46:00 »

I would say waterpump on instinct but at 8000 miles seems unlikely.

If it is the water pump they can make a huge amount of noise in use but really not feel too bad when turned by hand. But any roughness and it's a bad'n.
« Last Edit: 04 April 2008, 20:47:36 by JasonH »
Logged

ricardo1500

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wolverhampton
  • Posts: 108
    • View Profile
Re: Noise from cambelt area
« Reply #3 on: 04 April 2008, 20:56:44 »

I do have the old water pump still.....I changed them as soon as I bought the car and the pump looked brand new and was silent so can try putting that back in as a trial ...I will say the autovaux pump dint have the same "quality" look about it altghough they swore it wqas the same.....makes me wonder about the quality of the tensioners as well.

If the tensioners or rollers are shot will they feel rough when turned by hand?
Logged

JasonH

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 1079
    • View Profile
Re: Noise from cambelt area
« Reply #4 on: 04 April 2008, 21:32:42 »

Autovaux have unwhelmed me lately. They use phases like OEM when the parts are definitely not.
Logged

biggin_boy

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Hampshire
  • Posts: 16
    • View Profile
Re: Noise from cambelt area
« Reply #5 on: 04 April 2008, 22:55:10 »

is it definatly comeing from the cam belt area as i had a freind who thought the cam belt had jumped as it made all the right nosies so changed a the tensioners and belt and it turned out it was low on oil
Logged
snap-on scanner up to 2002 all makes hampshire area

ricardo1500

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wolverhampton
  • Posts: 108
    • View Profile
Re: Noise from cambelt area
« Reply #6 on: 04 April 2008, 23:01:52 »

No mate ...have checked the oil an it is right up to the top mark.  Looks like I am doomed to a day out in the snow tomorrow!!
Logged

CyNick

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Monmouthshire
  • Posts: 132
  • Car is stuck in KIDDERMINSTER!!
    • View Profile
Re: Noise from cambelt area
« Reply #7 on: 05 April 2008, 11:47:31 »

If you're going to go to the trouble of stripping down to that extent, maybe a new water pump at £20 - £30 is a better bet than putting the old one in??

Just a thought?  :-/
Logged

ricardo1500

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Wolverhampton
  • Posts: 108
    • View Profile
Re: Noise from cambelt area
« Reply #8 on: 05 April 2008, 13:54:52 »

Well it was the water pump.....loads of play in the bearing and sounds rough when spun by hand off the car. Auto vaux are going to get their warranty man to ring me on Monday, just over 12 months old but only 7-8000 miles use...we will see!
Logged
Pages: [1]   Go Up
 

Page created in 0.041 seconds with 21 queries.