Topic: Will It Fit?? (Read 790 times)

tbxid2002 · « **on:** 23 April 2008, 15:24:38 »

Hey again, not havin much luck finding a 3.2 engine! Does anyone know if a 3.0 will fit and run with the 3.2 ECU's etc??

Dazzler · « **Reply #1 on:** 23 April 2008, 15:26:39 »

Not really as the 3.2 is fly by wire and the 3.0 is cable so i believe the ecus are different. and so are the wiring looms. :-/

tbxid2002 · « **Reply #2 on:** 23 April 2008, 15:29:46 »

Hi! Thanks for the reply, im at a loose end with what 2 do so thought of that option, so the search must continue :-/

Marks DTM Calib · « **Reply #3 on:** 23 April 2008, 15:32:28 »

It will if you get a post 98 one and swap everything over including the cam covers

markey mark · « **Reply #4 on:** 24 April 2008, 09:35:05 »

if you just use the block and heads and swop eveything else over yes no worries !

Martin_1962 · « **Reply #5 on:** 24 April 2008, 12:35:10 »

Whats wrong with the 3.2?

tbxid2002 · « **Reply #6 on:** 24 April 2008, 12:44:46 »

Took the heads off, it's over heated and damaged both heads so need replacing, block also looks damaged so rather than risk it thought new engine