Topic: exhaust manifold (Read 1176 times)

eddie c · « **on:** 27 July 2008, 10:18:09 »

morning all can anyone tell me if the exhaust manifold off a 2.0 will fit 2.2 thankyou

Auto Addict · « **Reply #1 on:** 27 July 2008, 16:35:50 »

I don't think so, but someone may know better......

Taxi_Driver · « **Reply #2 on:** 27 July 2008, 17:06:45 »

For a Z22XE p/n - 24420438
For a X20XEV p/n - 24423056

So they are different.....but in what aspect i dont know :-/

The diagram of the two look the same to me :-/

JamesV6CDX · « **Reply #3 on:** 27 July 2008, 17:08:03 »

The 2.0 manifold has the additional holes for secondary air injection ...

eddie c · « **Reply #4 on:** 27 July 2008, 18:11:25 »

thanks for your replies i will take that as a no then, are 2.2s Z22XE

philhoward · « **Reply #5 on:** 27 July 2008, 18:20:52 »

The manifolds physically fit, but you'll have a bit of a "blow"... as James says, the 2.0 has a tube fitting in each port which is not drilled on the 2.2 one.

Taxi_Driver · « **Reply #6 on:** 27 July 2008, 20:08:26 »

Quote

thanks for your replies i will take that as a no then, are 2.2s Z22XE

Should be

But there should be a label on the cam cover with the code on it

Marks DTM Calib · « **Reply #7 on:** 28 July 2008, 09:46:07 »

They will fit but, you need to block the secondary air injection holes.

This can be done by tapping the casting and fitting a suitable sized bolt.

News:

Author Topic: exhaust manifold (Read 1176 times)

eddie c

exhaust manifold

Auto Addict

Re: exhaust manifold

Taxi_Driver

Re: exhaust manifold

JamesV6CDX

Re: exhaust manifold

eddie c

Re: exhaust manifold

philhoward

Re: exhaust manifold

Taxi_Driver

Re: exhaust manifold

Marks DTM Calib

Re: exhaust manifold