Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[LFF64]

I have fitted the headlamp wash bits to my car today , its actually a fairly easy job to do .
 I managed to get the old small tank out without taking the bumper off but no way would the bigger tank go in without taking it off again I am surprised how easy that was to do  
Right question is where does the relay go  :-? and do I need to do anything else to get them to work .
 Am I correct in thinking they only operate with ignition on and lights on  :question

[benbrunt]

I have fitted the headlamp wash bits to my car today , its actually a fairly easy job to do .
 I managed to get the old small tank out without taking the bumper off but no way would the bigger tank go in without taking it off again I am surprised how easy that was to do  
Right question is where does the relay go  :-? and do I need to do anything else to get them to work .
 Am I correct in thinking they only operate with ignition on and lights on  :question

They only work with ignition and sidelights or headlights on... dunno about the relay, will let others advise on that score...

[LFF64]

Anyone please  

[TheBoy]

See MDTM's engine bay relay box layout posts (think they are in Technical Info section)

[LFF64]

I did it does not appear to match what I have . looks like it will be tracing wiring time , but not tonight I am on a promise  

[LFF64]

Yesterday I got the relay working seems it was just dirty contacts in the relay base . Problem now is only the drivers side washer sprays water . I have taken the pipe off of the passenger side and water comes out of the pipe when operated so the pipe is not blocked .
Any suggestions , the pipe is securley fitted to the unit .  

[LFF64]

  Any one please