Topic: Plenum breather hoses clips (Read 818 times)

NickA · « **on:** 01 January 2009, 18:13:07 »

Are these the right type of pliers to refit the hose clips on the three breather pipes at the back of the plenum?

http://tinyurl.com/9jz2r5

or is it this type?

http://tinyurl.com/9q292x

blue_dream · « **Reply #1 on:** 01 January 2009, 18:17:47 »

Hi
No, look at sealey products, they are called C clip pilers which lets you unlock the clips and close them again, they are usable

hotel21 · « **Reply #2 on:** 01 January 2009, 18:27:07 »

There is no screaming pressure in those lines. Cableties are more than enough, most pipes can easily stay there by push pressure alone....

CaptainZok · « **Reply #3 on:** 01 January 2009, 19:02:04 »

Quote

There is no screaming pressure in those lines. Cableties are more than enough, most pipes can easily stay there by push pressure alone....

That's what I use and haven't had any problems with them.
To remove just cut them off and replace when refitting.

Marks DTM Calib · « **Reply #4 on:** 01 January 2009, 19:41:00 »

Those pipes dont need any securing at all......as they are less than atmospheric pressure with the engine running!

dbug · « **Reply #5 on:** 02 January 2009, 00:43:15 »

Quote

Those pipes dont need any securing at all......as they are less than atmospheric pressure with the engine running!

For peace of mind I used cable ties on mine.