Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Cam gasket change - other issues !!!  (Read 1172 times)

0 Members and 1 Guest are viewing this topic.

HerefordElite

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Hereford
  • Posts: 1724
  • Welcome to the Shire
    • View Profile
Cam gasket change - other issues !!!
« on: 15 February 2009, 10:15:40 »
Changing the cam gaskets etc this weekend all going ok at the moment few questions and issues!

when fitting the gaskets to the covers am i then putting the black sealant on the cam housings, the covers or both?

I've just noticed that No.6 exhaust bearing cap has got 1 screw hanging out!!! :o - shall i just re-tighten to 8Nm or would you use thread lock?? or other advice?

cheers guys :y
Logged
Nova SR, MKII Cav Sri130, MKII Astra GTE16v, Omega 3.0V6 Elite, Silver Cross Sleepover Classic

PaulW

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Somewhere near Manchester
  • Posts: 1769
  • Come on you fiend!
    • Some crappy Insignia
    • View Profile
Re: Cam gasket change - other issues !!!
« Reply #1 on: 15 February 2009, 10:25:24 »
Black sealant just goes on the cam housing, not on the covers IIRC.  And even then its just at a few little places.

http://www.omegaowners.com/forum/YaBB.pl?num=1152564281

Not sure on the bearing cap though, but I've heard a few people discovered this too when doing the cam gaaskets  :-/
Logged
Humbugs...

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34016
  • Git!
    • View Profile
Re: Cam gasket change - other issues !!!
« Reply #2 on: 15 February 2009, 10:29:34 »
Re-tighten the bolt to 8Nm....
Logged

HerefordElite

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Hereford
  • Posts: 1724
  • Welcome to the Shire
    • View Profile
Re: Cam gasket change - other issues !!!
« Reply #3 on: 15 February 2009, 10:33:16 »
Quote
Re-tighten the bolt to 8Nm....


gone round and found a few more LOOSE >:(

the one hanging out (literaly 1/4" off the cap) was the very rear exhaust so guess some rather muppet just forgot >:(
Logged
Nova SR, MKII Cav Sri130, MKII Astra GTE16v, Omega 3.0V6 Elite, Silver Cross Sleepover Classic

feeutfo

  • Guest
Re: Cam gasket change - other issues !!!
« Reply #4 on: 15 February 2009, 10:44:49 »
heard a couple of instances of this now. Id be tempted to lock tight as well personally...? Any thoughts on that? 8nm aint much.
Logged

HerefordElite

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Hereford
  • Posts: 1724
  • Welcome to the Shire
    • View Profile
Re: Cam gasket change - other issues !!!
« Reply #5 on: 15 February 2009, 11:50:21 »
Quote
heard a couple of instances of this now. Id be tempted to lock tight as well personally...? Any thoughts on that? 8nm aint much.


locktite was what i was thinking Chris but ain't got none so back together at 8Nm all round :-?
Logged
Nova SR, MKII Cav Sri130, MKII Astra GTE16v, Omega 3.0V6 Elite, Silver Cross Sleepover Classic

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34016
  • Git!
    • View Profile
Re: Cam gasket change - other issues !!!
« Reply #6 on: 15 February 2009, 11:55:39 »
Loctite is of little use on bolts that get hot
Logged

philhoward

  • Senior Member
  • ****
  • Offline Offline
  • Staffs
  • Posts: 939
  • Love the engines, so put one in something else..
    • View Profile
Re: Cam gasket change - other issues !!!
« Reply #7 on: 15 February 2009, 19:27:11 »
Depends which grade you use...
Logged
Running an X30XE in a Reliant Scimitar GTE as I can't have an Omega as a company car...
Pages: [1]   Go Up
« previous next »
 

Page created in 0.012 seconds with 17 queries.